User Tag List
Thanks: 0
Results 11 to 20 of 21
Thread: Happi Jack
-
10-30-2022, 04:31 PM #11
- Join Date
- Jul 2021
- Location
- Platte City, MO
- Posts
- 4,815
- Mentioned
- 61 Post(s)
- Tagged
- 0 Thread(s)
Are there ever any real details about how it happened? My wife reads the Facebook stuff fairly regularly, and she reads me some of it. It mostly seems to be lots of "OMG", "Glad you weren't hurt", "It could have been us", and the like, but no data about what exactly happened, how, and why. I'll have to admit I have little patience with the Facebook drama.
Howard and Peggy
2019 Momentum 351M, and 2018 RAM Cummins dually 6-speed.
His: 1999 Honda Interceptor
Hers: 2013 Spyder ST-S
-
10-30-2022, 05:03 PM #12
- Join Date
- Sep 2020
- Location
- Springdale, Ar
- Posts
- 632
- Mentioned
- 13 Post(s)
- Tagged
- 0 Thread(s)
Sometimes they just post and never come back. Usually if they do post back it's the set screw. I'm convinced that virtually 100% of the time that's the issue when the off side falls like that. The stub shaft on that drive is really short so the transfer shaft doesn't have to move very far to disconnect it.
2021 Momentum 31G
2021 20' Haulmark Edge race trailer
'17 Ram CCLB 3500 dually 6.7 turbo
'96 Chevy C3500 CC dually 454
2019 Honda Talon X
1985 Honda FL350R Odyssey
-
10-30-2022, 08:19 PM #13
- Join Date
- Jul 2021
- Location
- Platte City, MO
- Posts
- 4,815
- Mentioned
- 61 Post(s)
- Tagged
- 0 Thread(s)
Thank you again for expanding on what you have learned. Having had to seriously work with my Happijac beds when we first got our trailer, I can definitely see what you're talking about. I have secured my setscrew with a divot in the shaft, Loctite, and a couple zip ties as back up.
Howard and Peggy
2019 Momentum 351M, and 2018 RAM Cummins dually 6-speed.
His: 1999 Honda Interceptor
Hers: 2013 Spyder ST-S
-
11-07-2022, 08:11 AM #14
- Join Date
- Nov 2020
- Location
- Full Time Traveler
- Posts
- 152
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Ours has the new latching pins but there are holes still in place to put the pins. Might just pin it for extra safety. The garage is my man cave.
2019 F450 CC
2021 Momentum 395MS-R
-
03-13-2023, 07:49 PM #15
- Join Date
- Jul 2018
- Location
- Tennessee
- Posts
- 44
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I have a 353G and had the bed fall once which was due to the set screw coming out.
I check it regularly and am going to put loctite on it.
I have two issues (maybe more but these are the only ones I can think of now!)
First, I do not have any safety pins on the rails. Were there different models of the system that may not have safty pins or am I totally missing something?
I think I will drill holes in rails to put a safety pin in for travel.
Second, when I run the bed all the up , one of the four corners (usually the same one)will not latch. I have to push it up to make it latch. Is there an adjustment I can make to fix this?
-
03-13-2023, 08:11 PM #16
- Join Date
- Jul 2021
- Location
- Platte City, MO
- Posts
- 4,815
- Mentioned
- 61 Post(s)
- Tagged
- 0 Thread(s)
Ours has the pins, but there is a micro switch that stops the bed at a certain point. I would imagine you could move it up enough to get the bed to latch in place. Or the latch itself may be moveable. The pins are a PIA, but one has to say that with the pins in it is secure. I don't know how the latches work, but I would think they should also be pretty secure. The main thing is the Happijac beds are sooooo heavy.
Howard and Peggy
2019 Momentum 351M, and 2018 RAM Cummins dually 6-speed.
His: 1999 Honda Interceptor
Hers: 2013 Spyder ST-S
-
03-13-2023, 08:35 PM #17
- Join Date
- May 2022
- Location
- NW Illinois
- Posts
- 45
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
We have a 23G and I'm seriously considering taking out the bed deck. We never use it and if we ever needed another bed, we would probably just use the fold down couches. My only problem is finding a place to store it. I'd like to have the weight savings.
-
06-14-2023, 05:19 PM #18
- Join Date
- Sep 2021
- Location
- Edwardsville, IL
- Posts
- 13
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Your display is beautiful 🤩. Since I can tell you’re very patriotic, I wanted to let you know that the flag in lights is backwards. When a flag is displayed on a flat surface, the union (blue stars section) should be on the upper left, not the upper right as it’s shown in your pictures. In order for me to remember this easily, I think about ‘reading’ the flag like you would a book, starting with the stars section. Thank you for sharing your beautiful rig. 🇺🇸🇺🇸🇺🇸
https://news4sanantonio.com/news/loc...american-flag#Ken - Lori
2021 Ram Super Duty, 2500, Cummings Diesel
2016 Momentum M350 5th wheel toy hauler
2019 Cam Am Spyder RT Limited
-
06-14-2023, 05:48 PM #19
- Join Date
- Sep 2020
- Location
- Springdale, Ar
- Posts
- 632
- Mentioned
- 13 Post(s)
- Tagged
- 0 Thread(s)
Thanks! The flag has become a theme over the years. We have a lot of red, white an blue and a lot of displayed flags. Hopefully we can simply agree to disagree about the positioning of the flag. In my opinion the trailer is a vehicle in which case the stars should always be leading as I have it displayed.
"The USA flag should be displayed on the passenger side when flown singularly, but if displaying two flags simultaneously, it is acceptable to place them identically on both the driver and passenger sides of the vehicle. Be sure to mount both flags at an equal height, ensuring neither is lower than the other. The stars should always be in the upper left corner when on the driver’s side and the upper right corner when on the passenger’s side to ensure the union is always in a position of honor."2021 Momentum 31G
2021 20' Haulmark Edge race trailer
'17 Ram CCLB 3500 dually 6.7 turbo
'96 Chevy C3500 CC dually 454
2019 Honda Talon X
1985 Honda FL350R Odyssey
-
06-14-2023, 05:59 PM #20
- Join Date
- May 2022
- Location
- NW Illinois
- Posts
- 45
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I was looking at my happijack mechanism the other day and I saw that the hexagonal shaft on my camper has a series of slots cut into the shaft with a retaining clip in the slot that was the closest to the black portion of the shaft. This is slightly different than your photo above. a small improvement I guess.
Compass Connect App
Today, 06:38 PM in Control Systems