Identifying my Pin Box Model

[Fivecodys]

Like others here, I have been looking at swapping out my stock pin box with a MORryde box.
My rig (according to the build specs) has the LCI frame and pin box but they do not call out the model number of the pin box installed.
This makes getting the correct model from MORryde difficult.

I have looked all over my Pin box for a model number, to cross reference, and this is all I can find:




The Cross-Reference Guide doesn't show any of these numbers.

Am I looking in the wrong spot? Any help would be greatly appreciated.

[Soundsailor]

Like others here, I have been looking at swapping out my stock pin box with a MORryde box.
My rig (according to the build specs) has the LCI frame and pin box but they do not call out the model number of the pin box installed.
This makes getting the correct model from MORryde difficult.

I have looked all over my Pin box for a model number, to cross reference, and this is all I can find:




The Cross-Reference Guide doesn't show any of these numbers.

Am I looking in the wrong spot? Any help would be greatly appreciated.

Do you still have your build sheet? It should show on that. If not, reach out to GD customer service with your VIN number.

[Fivecodys]

Do you still have your build sheet? It should show on that. If not, reach out to GD customer service with your VIN number.

Yep. Not on there it just says LCI Straight Frame. I'll contact GD.

[Dutchman2]

Like others here, I have been looking at swapping out my stock pin box with a MORryde box.
My rig (according to the build specs) has the LCI frame and pin box but they do not call out the model number of the pin box installed.
This makes getting the correct model from MORryde difficult.

I have looked all over my Pin box for a model number, to cross reference, and this is all I can find:




The Cross-Reference Guide doesn't show any of these numbers.

Am I looking in the wrong spot? Any help would be greatly appreciated.

These charts should help ID your specific pin box and the cross reference to the MorRyde P/N.



Dutchman2

[Scocciante]

white tag inside pinbox between bolts

[Fivecodys]

white tag inside pinbox between bolts

I'll check there.
Thank you.

[huntr70]

You have a Lippert 1621 frame.

RPB72-1621HD-03 is the one you want.

[Fivecodys]

You have a Lippert 1621 frame.

RPB72-1621HD-03 is the one you want.

Thank you sir. How did you come up with that?

[huntr70]

Thank you sir. How did you come up with that?

I work around Reflections every day and I have one. They were all 1621 frames (except the 150 Series) in 2020.

I put the MorRyde on my own unit, just the one up in weight from what you need.

[Fivecodys]

Well then that explains it doesn't it?
Thank you again for your help on this. I do appreciate it.