C-pap machine users

[CX500T]

Does everyone still have floor space with having a King bed?

I could put it on the floor in my 397TH (king bed) but I use the shelf in the wall.. I also ran a 12V plug and use a 12 V power brick vs 120VAC brick to power it. 6 foot hose is your friend.

[Soundsailor]

I could put it on the floor in my 397TH (king bed) but I use the shelf in the wall.. I also ran a 12V plug and use a 12 V power brick vs 120VAC brick to power it. 6 foot hose is your friend.

Yes, the 12-volt power source is more battery friendly.

[DohMan]

Any C-pap users struggle with the small bedroom shelf’s next to the queen bed? Looking at a 337 specifically.

My wife and I place ours on the floor of the slide next to the bed. There is a small "shelf" or flat spot where it will sit. It's also close to an outlet on each side. Sorta a pain to reach but it works.

[zimdavid]

Any C-pap users struggle with the small bedroom shelf’s next to the queen bed? Looking at a 337 specifically.

We place ours on floor next our bed in our 295RL Works fine. My concern is powering the units when off grid.

[DohMan]

We have a 337 and put ours on the slide out floor which has an area next to the bed on each side that has sufficient room to put the CPAP. It't the easy to reach but its out of the way. I have a friend who built a shelf that mounts on each side of window that he puts his on. You can still open the window and the shelf is removable.