Furrion Backup Camera Screen Size

[Soundsailor]

So, I believe I'm settling on the wireless Haloview with the 5" screen, but given the length of my rig, I'm wondering which setup to buy given that there are several. I'm not too inclined to get the side cameras, but it appears that some of the rearview cameras aren't rated for much distance.

Any suggestions?

Get the longer antenna.

[Whitexc]

Furrion display mounted to the rear view via the Haloview mount.
Wiring:tapped into the overhead console and installed a fused 12v socket to utilize the factory Furrion plug.
Haloview mount and some heavy Velcro on the display.
No tow mode. No wires, no mounts.

[Soundsailor]

Furrion display mounted to the rear view via the Haloview mount.
Wiring:tapped into the overhead console and installed a fused 12v socket to utilize the factory Furrion plug.
Haloview mount and some heavy Velcro on the display.
No tow mode. No wires, no mounts.

Good looking install, I especially like how you tapped into the console for power. How easily does it come on and off?

[Whitexc]

Good looking install, I especially like how you tapped into the console for power. How easily does it come on and off?

Thanks. The cool dude rubber ducky helps a lot with install[emoji1787].

If you mean the upper console removal: The console has 2 8mm screws inside the sunglass door and then there are also 2 clips you use a flathead on. Once those two clips are released it’s just wiring. I drilled a small hole up inside to feed my power and ground through. There is a screw up in the headliner used to hold a wiring track. I used that as my ground and found key on power in the main plug via test light.

If you mean the display and Haloview mount it is just two rubber straps around the mirror.

[Soundsailor]

If you mean the display and Haloview mount it is just two rubber straps around the mirror.

Yeah, I took a closer look at the photo you posted and saw that. I also have the Haloview mount, but the version I have came with Velcro straps. When I'm sliding it on it can trigger buttons on the mirror (Onstar). I'd prefer something more like what you have.

[Whitexc]

Yeah, I took a closer look at the photo you posted and saw that. I also have the Haloview mount, but the version I have came with Velcro straps. When I'm sliding it on it can trigger buttons on the mirror (Onstar). I'd prefer something more like what you have.

Mine came with the Velcro straps as well. I figured I would try the rubber bands first and while the are a little bit of a stretch they hold well for now. We shall see how long they last.