Anderson Kantleak

[Big G 56]

Anyone replace the Anderson Kantleak water service panel with the new all brass valve panel?

[WhittleBurner]

we came close recently but through Anderson we located the center replacement valve. It seems to fix things for now. Next time will replace.
That all brass valve is 6 weeks out when ordering their Anderson.

[Canyonlight]

I recall a couple threads. I seem to recall another or two as well.

Here is one from Lyle: https://www.mygrandrv.com/forum/show...light=kantleak

Here is another one from John: https://www.mygrandrv.com/forum/show...ht=brass+valve

Not certain the John and/or Lyle check in here much anymore. Maybe try sending a PM to each and see if respond.

Dan
Dan

[Big G 56]

Thanks for the links. I did end up replacing the complete water service panel and yes the hot water to fixtures and cold water to water heater lines are reversed on the new panel. After some piping modifications and (you will also need a 1/2 coupling) working in a cramped space, all is complete and dry!

[jkwilson]

I carry a spare all brass panel with me. This magically prevents problems with the existing panel.

[FT4NOW]

I carry a spare all brass panel with me. This magically prevents problems with the existing panel.

This makes sense to me. I put little green plastic army men in my 399 to prevent electrical gremlins from bothering me...I learned from being stationed on aircraft carriers, figured if it worked there, why not the RV?

[Canyonlight]

I carry a spare all brass panel with me. This magically prevents problems with the existing panel.

John - that's funny right there !

Dan