User Tag List
Thanks: 0
Results 1 to 3 of 3
-
02-24-2023, 06:19 AM #1
- Join Date
- Dec 2020
- Posts
- 21
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Connecting two lynx distributors end to end
For my application, I need 5 open connections on the distributor. I know you can connect multiple Victron components end to end such as a Lynx Power In and a Lynx Shunt. I searched the Victron Knowledge base and came up empty. Can you connect 2 Lynx Distributors end to end? Thanks!
-
02-24-2023, 07:36 AM #2
Hi, absolutely you can. Once you pull the cover, If you look on the right hand side of your distributor, you will see a black plastic wall. It just lifts out and you can stack a second distributor on top and bolt them together and then just add the cover back on.
I also have provided a link on a hack to add an additional space if all you need is one more rather than buying another Lynx at a couple hundred bucks and taking up twice the space.
https://m.youtube.com/watch?v=W9n01vuGDgM
Would love to see some pictures.
Good Luck!
Bill2019 GMC 3500 SRW Sierra Denali Duramax
2020 Reflection 315RLTS
-
02-24-2023, 08:23 AM #3
- Join Date
- Dec 2020
- Posts
- 21
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thanks! I really enjoy Nate's videos! I did a search on his site for Lynx distribution, but that video didn't come up in the results. So, thanks for posting it. That is the route I will go. It will be used for my portable 200Watt Solar panel with a separate MPPT charge controller.
Outside Trim Torx screw size
Today, 07:39 PM in General Discussion