Broken Drawer Slide/track

[RobertS377]

We broke a track on a kitchen drawer on our 303rls. I'm trying to find a replacement and after looking at the big box stores and Amazon I'm not sure what type I need.

Looks like mine attaches at the back of the cabinet (via a staple gun), then the new track slides into that. The closed length of the drawer slide is 12" and the track width is 1 1/2". It's the drawer on the far left of the hutch over the fixed water heater drawer.

Anyone replaced one of these? If so, any help is appreciated.

FYI...we broke it while opening the #1 slide. We didn't notice it had opened during travel and the slide damaged it. Keep that in mind to avoid my problem.

Thanks in advance. Bob

[NB Canada]

Why not just call GD and get it from them

[JCR GD]

I had to replace one in my bedroom dresser (same as you describe) could not find the same one so I just bought a new set at Lowes and replaced both sides. The ones I got had options for mounting including the end bracket you described. Just be sure to get the right length.

[Fsalmy]

I had to replace one in my bedroom dresser (same as you describe) could not find the same one so I just bought a new set at Lowes and replaced both sides. The ones I got had options for mounting including the end bracket you described. Just be sure to get the right length.

Had a similar issue, but could not find the correct length locally. Ended up ordering soft-close drawer slides from cabinetparts.com

[RobertS377]

My thanks to both of you.

I actually did call GD and they could not find the correct part. That's why I posted here.

As fate would have it, they called me back not long after posting and found it. Total cost including tax/shipping was $15. The rep was fantastic...very pleased with their Customer Service.