User Tag List
Thanks: 0
Likes: 0
Results 1 to 3 of 3
Thread: TV replacement
-
04-05-2023, 12:54 PM #1
- Join Date
- Apr 2023
- Posts
- 1
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
TV replacement
Hi,
I'm a new member to the GD Forum. I have a 2018 Imagine 2150RB and I need to replace my TV. When I look at the back of the TV I can see that the mounting screws for the bracket are located behind a plate and there is no room to remove them. On the TV end of the swing arm there appears to be a "V" slide in mount. Should the TV just slide up and out of this bracket? It will not just slide up without some force and I am afraid of breaking something. Is there a locking screw or tab I'm not seeing? Do I have to disassemble the swing arm or remove the screws with a vice grip?
Any help would be greatly appreciated.
-
04-05-2023, 02:36 PM #2
- Join Date
- Jun 2019
- Posts
- 1,593
- Mentioned
- 18 Post(s)
- Tagged
- 0 Thread(s)
The television side mount of the VESA is meant to fit snuggly. Our 295RL has the same VESA mount on our 40" TCL factory setup. As for removal, yes, it should just lift off the VESA arm that it attached to the wall.
You may need to relieve some pressure by ensuring to keep the tele as vertical as possible while trying to lift it off - by tilting the top back a little while also keeping the bottom straight while holding the tele.
Take your time and be sure to unhook all wires and have plenty of room to manuver before trying to remove it.Jim and Annette
2019 Reflection 150 295RL
US Army Veteran
Missouri (AKA Misery)
-
04-05-2023, 02:41 PM #3
- Join Date
- Aug 2021
- Location
- New Hampshire
- Posts
- 3,215
- Mentioned
- 51 Post(s)
- Tagged
- 0 Thread(s)
Welcome to the forum @imagine2087, glad to have you with us. Looks like you've already gotten some good advice from @trailrydr on your TV mount. Let us know what else we could help with.
Stephen and Judy
2022 Reflection 150 Series 260RD (Stella)
2017 Chevy Silverado 2500 HD (Blue)
Traded - 2018 Forest River Rockwood Minilite 2104S
Morryde Safe-T-rail install issues
Today, 12:55 AM in Mods and DIY