User Tag List
Thanks: 0
Likes: 0
Results 1 to 4 of 4
Thread: 2670MK Questions
Threaded View
-
03-18-2023, 04:09 PM #1
- Join Date
- Dec 2018
- Location
- NY, Suffolk County, Long Island
- Posts
- 562
- Mentioned
- 12 Post(s)
- Tagged
- 0 Thread(s)
2670MK Questions
We recently traded in our Transcend 26RLS for an Imagine 2670MK and I've got a few questions for those who already own one.
We often camp where there is little or no TV reception so we sometimes will watch a movie on DVD. I can't seem to find a place to install the DVD player. There is a small "cubby" under the counter top over the fire place, but it has a lot going on inside it. It has the switch to raise and lower the TV, plus the antenna connections and AC power plug for the TV, so there isn't much room left inside it even though the DVD is quite small.
We also own a Bose sound bar that I would like to install on the motorized TV mount, just below the TV set, since there is plenty of room. That's when I noticed that the motorized TV mount is installed a bit "off". The mount isn't installed in the center of the space. Not only that but the TV is not centered on the TV mount, its off to one side. The TV is not even centered in the opening in the counter top cut out either. It's like whoever installed the TV and mount didn't own a ruler and/or did not be believe in symmetry. So is there a reason why it was installed this way? Sound I reinstall it all, centering everything? I thought that it would be easy to install the Bose sound bar under the TV if I removed the TV from the motorized mount, but GD used a strange bolt to mount the TV and I can't seem to figure out what it is. Its definitely not a torques head, its not an Allen key (metrics or standard), its like nothing I've ever seen. Does anyone know what type of bolt head it is?
Did any of you ever put a slide topper on the kitchen (passenger) slide out? If so, what did you use? I can't seem to find one that fits.
I took down the plastic shroud around the bedroom vent cover and I noticed what appeared to be two air ducts, one on either side. What are they for? The units was prepped for a second AC unit. Is the second AC unit supposed to tie into the those two ducts somehow? I'm curious.
Thanks
BobLast edited by BeerBrewer; 03-18-2023 at 04:58 PM.
Looks like another big shift in...
Today, 01:14 PM in Tires