2016 Reflection 313rlts bed slide out

[Jerrydc]

Bed slide out will not work. I checked the 30 amp Fuse in the panel and the switch which are both ok. It seems to not be getting any power. I could not locate the motor or a manual crank. Is there an inline fuse? Any help would be greatly appreciated.
Thanks Jerry

[NB Canada]

Looks like a Schwintek. There is no manual crank. It has 2 motors

[Second Chance]

Thread moved to Slide Systems.

That bed slide is a Schwintek as described above - so no manual options. There is a controller, however - probably in the front compartment somewhere. You can find it and see if it's getting power. If it is, there's a controller or wiring issue somewhere.

Rob

[Jerrydc]

Thanks I'll check it out.

[Jerrydc]

Thanks I appreciate it.

[Second Chance]

Thanks I'll check it out.

Thanks I appreciate it.

@Jerrydc -

Since you're new - welcome to the forum! Here are a few forum tips:

1) If you use "Reply With Quote" (to the right of "Reply") as I have here, folks will know to whom you are responding and that person will get a notification.

2) You can also tag folks using the "@" symbol and their user name (as I have done yours) - they'll also get a notification that way.

3) You can create a signature block with your RV and tow vehicle information (see mine below). That way you won't have to repeat that information whenever you post or ask a question - and others won't have to ask. You can create a signature by going to:

Forum Actions (on menu bar) -> Edit Profile -> Edit Signature (under My Settings on the left)

Rob