User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4
  1. #1
    Setting Up Camp
    Join Date
    Sep 2022
    Location
    Oak Park Ca.
    Posts
    15
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    2022 28G Front lower panel pulling out

    Click image for larger version. 

Name:	ale0jlek.png 
Views:	26 
Size:	78.8 KB 
ID:	45830

    The front lower panel is pulling away from the trim. Anyone seen this? I can push it back into alignment but it feels like the lower fascia board is warped

  2. #2
    Site Sponsor NB Canada's Avatar
    Join Date
    Sep 2018
    Location
    Woodstock
    Posts
    3,646
    Mentioned
    60 Post(s)
    Tagged
    0 Thread(s)
    Warped unfortunately could mean water intrusion
    2021 Imagine 2400 BH
    2018 GMC Sierra 4x4 Crew 1840lb payload

  3. #3
    Site Sponsor Thorvald's Avatar
    Join Date
    Oct 2017
    Location
    Innisfil, Ontario
    Posts
    389
    Blog Entries
    3
    Mentioned
    4 Post(s)
    Tagged
    1 Thread(s)
    Yep, could be the dreaded “water from storage door or outdoor kitchen door”. Check my thread in this forum for the 25g (same layout as the 28G). If your trailer was nose down in rain all that water that gets in front the doors would go to the front of the trailer.

    I’m still battling stopping the water from getting in, trying a whole bunch of ones mods this year to try to resolve.

    You should be able to see in there from the front storage compartment and under the trailer (they don’t cover that area underneath). If it’s just crappy installation and not water damage, should be fairly easy to fix.
    2022 Momentum 25G (aka "Baby Mo")
    2020 Ram 3500 Laramie SRW | 6.7 HO Aisin | 6’4” bed | 3.73 gears | air suspension | 3694# Payload
    Blog Post: 1500 Pickup’s and Towing - The REAL numbers with example
    Blog Post: 2016-2018 Imagine 2800BH - 3500 lb Axles Tire Rubbing Issues

  4. #4
    Setting Up Camp
    Join Date
    Sep 2022
    Location
    Oak Park Ca.
    Posts
    15
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    It is slightly down hill and leaning to that side. I pulled out the trim/moulding screw and ran a 3" one in its place which sucked it back in where the silicone lines up.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.