2600rb brake assembly

[Bags4266]

Hello, I need one right side brake assembly but am confused while looking up the part. E trailer shows the proper one I’m looking for but it states it’s for a 3500# axle. My axles are dexter #4400. Etrailer shows a different looking assembly than what I need to replace.
So has anyone changed them out and have a part number? My brake assembly has one horizontal upper spring. And trailer claims that’s for a 3500# axle. The 4400# axles have two diagonal upper springs. Thanks

[Hoopy Frood]

You should have a tag, if it's a Dexter axle anyway, on the axle itself that will provide you with all the info you need to rebuild any part of that axle. You may have to crawl underneath to access it though.

[Bags4266]

I think I found it, after searching for an hour. 023-463-00

[Hoopy Frood]

Contact Dexter with that number, and they'll supply with you with all the information you need. I did that for the axles under our old Fuzion.

[Redapple63]

I think I found it, after searching for an hour. 023-463-00

That is the part number for a 4400lb axle per dexter.

Dexter 4400lb axle brakes
https://www.dexteraxle.com/product/2...brake-assembly

Amazon link for the part you need
https://a.co/d/161inol

Aftermarket 3500lb axle brakes
https://a.co/d/42ApIkT

Bill

[Bags4266]

Thank you all for your help. As I was looking up a parts dealer near me I discovered there is a dexter trailer part store 1.4 miles away. Jackpot.

[jleonard]

Just make sure you have Dexter axles. My 2022 has Lippert axles.

[freewayrandy]

That is the part number for a 4400lb axle per dexter.

Dexter 4400lb axle brakes
https://www.dexteraxle.com/product/2...brake-assembly

Amazon link for the part you need
https://a.co/d/161inol

Aftermarket 3500lb axle brakes
https://a.co/d/42ApIkT

Bill

How easy are these to change out? Is it just 4 bolts and the wires? Do the new bearings need to be greased?

[uwskier]

How easy are these to change out? Is it just 4 bolts and the wires? Do the new bearings need to be greased?

Easy. Four bolts, connect wires, and adjust. You CAN do the bearings while you have everything apart, since that's convenient, but it's not necessary.

[uwskier]

Just make sure you have Dexter axles. My 2022 has Lippert axles.

Mine too. The brakes on mine are identical to the 3500 lb axle units. In fact, when I needed warranty replacements on one axle, that's what Lippert replaced them with.