User Tag List
Thanks: 0
Likes: 0
Results 1 to 7 of 7
Threaded View
-
05-23-2023, 06:23 PM #1
- Join Date
- Jun 2021
- Location
- Minnesota
- Posts
- 1,664
- Mentioned
- 26 Post(s)
- Tagged
- 0 Thread(s)
12v Victron Multiplus DC Connection
I'm almost embarrassed to ask this. Installing lithium batteries with a Victron Multiplus and assortment of other equipment. I am connecting the batteries to buss bars, then T class fuse and cut off switch feeding into a Lynx Distribution box, then to the Multiplus. I'm making the layout and primary cables now on a table in preparation for the actual installation in the RV. I've just realized that for DC side, the multiplus only has inputs - no outputs.
Am I correct in assuming I connect the DC circuit from the RV to the Lynx Distribution box and not directly to the Multiplus? All along in my head I just assumed the RV DC circuit would be fed from the Multiplus but it seems now that is not the case. Not a problem, I just want to verify I'm not misunderstanding it?
EDIT: Disregard, I found clear diagrams. Not sure why I had trouble verifying earlier but I have it now...Last edited by Riverbug; 05-23-2023 at 07:07 PM.
Chad
2023 23LDE 965W Solar, Victron Multiplus, Solar Controllers, Cerbo GX, 4x280AH DIY Lithium Batteries, SeeLevel Tank Monitoring, Shock Absorbers (Replaced 2022 22MLE)
2022 F350 6.7L Superduty, Carbonized Gray, Ultimate Lariat Pkg, 4WD, Crew Cab, 160" Wheelbase, 3.55EL Rear End, 3566# Payload
Adaptive Steering, Ultimate Camera Pkg, 20" Wheels, 397 Amp Dual Alternator, ARE Topper (Replaced 2004 F150)
Speed Rating?
Yesterday, 10:37 PM in Tires