Help in identifying backing plate wiring part.

[powerscol]

in the attached picture is a white plastic push in wiring clip. It hold the brake wires against the backing plate so the don't flop around. Does anyone have a part# or what the proper name is. I broke one on the other drum. A small plastic piece fell into the drum - hope that is not and issue. Looks like the hole it fits in is about 1/4" I guess the plastic needs to be a little heat resistant too.

Thanks for any help

[FT4NOW]

For something like that I would try to contact the axle manufacturer and see if they can send you a replacement.

[bridgway]

So, its a simple wire strap.. https://carolina-classics.com/produc...-fits-1-4-hole.. but I agree, get a hold of the manufacturer first to see if they can hook you up.

[powerscol]

Thanks
At least I know what to call it how.