User Tag List
Thanks: 0
Results 1 to 10 of 14
Thread: Magnetic holder on entry door
-
05-30-2023, 02:25 PM #1
- Join Date
- Oct 2022
- Location
- SK Canada
- Posts
- 35
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Magnetic holder on entry door
On our main entry door it has a friction hinge but also a magnetic bump stop holder to help hold it back against the camper when open. We installed the rvlock keypad entry handle as we had it on our last camper. Since this handle has a larger surface and curves outward some, the magnet doesn't get to the bump stop now before the handle hits the wall of the camper.
I will need to either shim out the piece on the door and/or the piece on the wall of the camper. Has anyone done this and if so what did you use as your shim?
Anthony & SarahJayne
2022 Imagine 2910BH
-
05-30-2023, 05:10 PM #2
I had to shim the magnetic catch on the access door to the outside kitchen. I just cut a small block of wood, painted it black, and coated it with epoxy. Probably not in a place that would be as noticeable as yours though.
2020 Reflection 273MK
-
07-14-2023, 11:59 AM #3
- Join Date
- Feb 2020
- Posts
- 16
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
2021 Grand Design Imagine 2670MK
2022 RAM 2500 HEMI 6.4L 3.73 Axle - Equalizer 4 Bars
-
07-14-2023, 12:23 PM #42021 398M Full Body Paint 8k axles. LRH tires. Disc brakes.
Two bathrooms, no waiting 155 fresh, 104 black, 104 grey 1860 watts solar.
800AH BattleBorn Batteries No campgrounds 100% boondocking
2020 Silverado High Country 3500 dually crewcab Duramax Allison
-
07-14-2023, 03:07 PM #5
- Join Date
- Oct 2022
- Location
- SK Canada
- Posts
- 35
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
I havent done anything yet but my plan is as follows.
I work at an ag equipment dealer so I plan to get my hands on some take off pieces of wear material. This is usually a urethane type piece like a cutting board. Cut into shape and then paint black and use larger screws.Anthony & SarahJayne
2022 Imagine 2910BH
-
07-16-2023, 05:38 PM #6
- Join Date
- Feb 2022
- Location
- Seattle, WA
- Posts
- 52
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
2022 Reflection 150 Series 226RK
2022 F350 CC SB SRW 7.3
-
07-16-2023, 06:53 PM #7
- Join Date
- Jun 2021
- Location
- Minnesota
- Posts
- 1,643
- Mentioned
- 26 Post(s)
- Tagged
- 0 Thread(s)
This stuff comes in handy for various projects like this...https://www.amazon.com/gp/product/B0...e?ie=UTF8&th=1
Chad
2023 23LDE 965W Solar, Victron Multiplus, Solar Controllers, Cerbo GX, 4x280AH DIY Lithium Batteries, SeeLevel Tank Monitoring, Shock Absorbers (Replaced 2022 22MLE)
2022 F350 6.7L Superduty, Carbonized Gray, Ultimate Lariat Pkg, 4WD, Crew Cab, 160" Wheelbase, 3.55EL Rear End, 3566# Payload
Adaptive Steering, Ultimate Camera Pkg, 20" Wheels, 397 Amp Dual Alternator, ARE Topper (Replaced 2004 F150)
-
01-31-2024, 08:36 AM #8
- Join Date
- Dec 2023
- Location
- Lake Stevens, WA
- Posts
- 88
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Last edited by BWSTGDS; 01-31-2024 at 09:53 AM.
2001 F350 SRW CC LB Lariat 7.3, 33" Toyo AT2, Transgo, 6.0 trans cooler, exhaust brake, extended overload spring bumpstops, Bilstein 4600, Hydra/PHP, FORScan, billet 7/7 turbo wheel, Adrenaline HPOP, EBC yellow stuff brake pads
2019 Solitude 377MBS, 5.5kW Onan, Kodiak disc brakes/Titan Brakerite actuator, EquaFlex/wetbolts, Triangle TRT01 LRG tires, Splendide W/D, Magnum Energy 3000W inverter/charger, 4-225AH-6V NPP AGM's, Winegard WiFi extender, RV airflow, Progressive Ind HW EMS, Andersen Ultimate Hitch
-
01-31-2024, 11:04 AM #9
- Join Date
- Feb 2020
- Posts
- 16
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
-
01-31-2024, 12:37 PM #10
- Join Date
- Mar 2021
- Location
- South Central PA
- Posts
- 114
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
2022 337RLS & 2017 CTD Ram long bed
720w of solar & Victron MPPT/battery monitors
4x100AHr LiPo batteries & 2500w PSW
Lots of other mods too....
Victron 100 amp Autotransformer...
Today, 12:14 AM in Electrical System and Wiring