User Tag List
Thanks: 0
Likes: 0
Results 1 to 10 of 10
-
02-09-2024, 07:32 AM #1
- Join Date
- Apr 2020
- Posts
- 231
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Oven burner flame going out whiie cooking
Hello,
My oven burner (flame) is starting to consistently go out while cooking.
In other cases, it turns down to a lower setting without me touching the knob.
And, if I try setting it to the max temp, I get mostly a yellow-orange flame, and not so much blue.
What's going on?
Does my oven just need to be cleaned of soot and build-up?
If so, what is the best method to remedy this?
Thanks,2020 GD Imagine 2970-RL
-
02-09-2024, 08:01 AM #2
- Join Date
- Jul 2017
- Location
- SW Indiana
- Posts
- 1,989
- Mentioned
- 43 Post(s)
- Tagged
- 0 Thread(s)
The first thing I would do is check your gas pressure. Plenty of YouTube videos on how to make a simple manometer and test it. Should be an annual or pre-major trip check as routine. Here’s one: https://www.youtube.com/watch?v=QnlfQK-8qy4
What specific oven do you have?John & Kathy
2014 F250 Lariat FX4 6.2L SBCC
2014 Reflection 303RLS
SW Indiana
-
02-09-2024, 08:20 AM #3
- Join Date
- Apr 2020
- Posts
- 231
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I have a Furion 2-in-1. There are 3 Models listed on the Instructions for some reason. The first indicates it's a: FS17WB4A-BL, but I also see others with a similar model number.
I should mention that the flames on the Stovetop appear to work just fine; it's just the Oven.2020 GD Imagine 2970-RL
-
02-09-2024, 10:13 AM #4
- Join Date
- Mar 2021
- Location
- Dayton OH
- Posts
- 264
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
make sure the thermocouple into the back of the oven valve is tight. When I got mine I had similar issues and it was very loose.
Possible the thermocouple went bad too.2021 Imagine 2800BH
2017 Flagstaff 831CLBSS - Sold 5/2021.
2017 F150 Super crew, 3.5EB, long bed, max tow, 1800lbs payload. Pro Pride, prior WDH Blue Ox SwayPro
-
02-09-2024, 01:11 PM #5
- Join Date
- Jul 2017
- Location
- SW Indiana
- Posts
- 1,989
- Mentioned
- 43 Post(s)
- Tagged
- 0 Thread(s)
-
02-09-2024, 08:10 PM #6
- Join Date
- Mar 2017
- Location
- Cedaredge, CO
- Posts
- 1,303
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
Take out the thermocouple and sand paper it. I've
done this a few times and it did work. You will have to replace it sometime.2018 Solitude 375 RES 2022 F450 Powerstroke Dually
-
02-10-2024, 06:23 AM #7
- Join Date
- Sep 2013
- Location
- Huron Twsp, MI
- Posts
- 985
- Blog Entries
- 2
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
When you notice the oven flame go out, has the pilot gone out too? Do you have to relight the pilot to continue cooking your meal?
Tom & Nancy
Newport, MI
369RL, #302
[SIGPIC][/SIGPIC]
-
02-10-2024, 01:37 PM #8
- Join Date
- Apr 2020
- Posts
- 231
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Sometimes I have to relight, sometimes not.
2020 GD Imagine 2970-RL
-
02-11-2024, 11:05 AM #9
- Join Date
- Sep 2013
- Location
- Huron Twsp, MI
- Posts
- 985
- Blog Entries
- 2
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
My guess then would be the thermocouple or a dirty pilot. You'll find youtube videos on how to disassemble and clean. Good luck going forward.
Tom & Nancy
Newport, MI
369RL, #302
[SIGPIC][/SIGPIC]
-
02-11-2024, 11:12 AM #10
- Join Date
- Apr 2020
- Posts
- 231
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Thanks, I'll try that!
2020 GD Imagine 2970-RL
Speed Rating?
Today, 10:37 PM in Tires