User Tag List

Thanks Thanks:  0
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Rolling Along
    Join Date
    Aug 2015
    Posts
    537
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Dining Slide in 2015 303 RLS-table hits island

    With the slide all the way in the table hits the island (rubbed the finish off the island and table) and the carpet is curled up against the bottom. The carpet is not that big of a deal (yet) but the table was. It can't relocate/move back towards the window there isn't enough room to get the blind down and it's too close to the glass. I unscrewed it from the floor and we turn it sideways, strap it down when we travel. Looks like a design issue or the island placement is off. Maybe a table and inch shorter would be in order.

  2. #2
    Site Sponsor John612's Avatar
    Join Date
    Mar 2015
    Location
    CA
    Posts
    692
    Blog Entries
    1
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    The only problem we had was the drawer sliding during travel and hitting the island.
    We had been putting our silverware in the drawer and it was heavy enough to cause the slide to move out.
    Took out the silverware and no more problem, store napkins and towel or two in it.
    John, Susan & Luke
    2015 Reflection 303 RLS #867
    Bakersfield, CA

  3. #3
    Rolling Along
    Join Date
    Aug 2015
    Posts
    537
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    nothing in the drawer but the 4 screws that held the table in place

  4. #4
    Seasoned Camper mbaker's Avatar
    Join Date
    May 2015
    Location
    Orillia, Ontario, Canada
    Posts
    165
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    We had the same problem, but I was able to move the table a half inch to the window and that solved it (not sure if the blind passes the table but hadn't thought of needing the blind below the table). Grand Design replaced the worn piece.

  5. #5
    Seasoned Camper CManley's Avatar
    Join Date
    Feb 2015
    Location
    Elk Grove, Ca
    Posts
    399
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I have seen a couple of posts on this subject here and on Facebook. The island installation point must vary by installer given an inch or less is causing issues. I would expect that the size of the table would remain the same. Also would think they would pick this up during the two Quality checks they perform.
    The mountains are calling and I must go" John Muir

    Chuck
    2015 Reflection 303 RLS
    2005 Chevy Silverado 2500 HD Duramax
    Elk Grove, Ca


    http://i50.photobucket.com/albums/f3...psotab2qdx.jpg

  6. #6
    Rolling Along
    Join Date
    Aug 2015
    Posts
    537
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    The blind going past the table isn't a big deal but the table was so close to the window I was afraid if it moved much it would hit the glass. Right now I'm satisfied with it being movable. One upside I can get by the island with slide in. I fixed the damaged areas myself, dealer tried but it looked worse. This post was more of a 'hey GD this might be a design problem"

  7. #7
    Rolling Along
    Join Date
    Aug 2015
    Posts
    537
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    I think the problem got worse when the dealer had to adjust the slide during the PDI. Slide being out of adjustment should have got caught during factory PDI.

  8. #8
    Fireside Member
    Join Date
    May 2014
    Location
    Sussex WI
    Posts
    62
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Ours is the same. The dealer moved the table a little closer to the the window. Still touched the island. So I stuck a Dark brown chair foot pad on the island and the table bumps up to it and protects the table edge. The blind just clears the table with a little fineese.
    Paul & Debbie
    2015 303RLS. #679 16” tires 2” lift
    2018 F350 SRW CCSB 4x4 6.7 Diesel 3.55 B&W Std Hitch

    Sold 5/18. 2005 GMC 2500 HD Crew Cab short bed Duramax,

  9. #9
    Site Sponsor Cate&Rob's Avatar
    Join Date
    Jul 2014
    Posts
    8,880
    Mentioned
    85 Post(s)
    Tagged
    0 Thread(s)
    Parallel thread . . . same comments . . .
    http://www.mygrandrv.com/for...le+hits+island

    Rob
    Cate & Rob
    2015 Reflection 303RLS

  10. #10
    Manufacturer
    Join Date
    Sep 2013
    Location
    Bristol & Middlebury, Indiana
    Posts
    1,297
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Clsfly View Post
    The blind going past the table isn't a big deal but the table was so close to the window I was afraid if it moved much it would hit the glass. Right now I'm satisfied with it being movable. One upside I can get by the island with slide in. I fixed the damaged areas myself, dealer tried but it looked worse. This post was more of a 'hey GD this might be a design problem"
    Hi Chuck @ Glenda (@Clsfly),

    Thank you for the post. Please contact our Customer Support for assistance, they can be reached at (574) 825-9679.

    Edited to add: Thanks for including your VIN in your forum profile! Our Customer Support will contact you.

    Best regards,
    ~ Janice
    Last edited by GDRV Service; 10-21-2015 at 09:56 AM.
    Mailing & shipping address: Grand Design RV, Attn: Customer Support, 13868 CR 4, Bristol IN 46507
    Hours: Monday - Friday (8:00 am - 5:00 pm EST, closed holidays)

    - Phones: Grand Design RV Corporate at (574) 825-8000 or Customer Support (direct) at (574) 825-9679
    - Fax: (574) 825-9249
    - Email: [email protected]
    - Website: www.granddesignrv.com

    - Facebook: https://www.facebook.com/GrandDesignRv
    - Twitter: https://twitter.com/granddesignrv
    - Google+: https://plus.google.com/113479014558069639097
    - LinkedIn: https://www.linkedin.com/company/grand-design-rv-llc
    - Vimeo: https://vimeo.com/granddesignrv
    - YouTube: https://www.youtube.com/channel/UCHa...PuUd3J3NHNyXVQ

    For EMERGENCY or immediate assistance contact your RV dealer or GDRV Customer Support directly at (574) 825-9679 with your 17-digit RV VIN, name, and phone number.

Page 1 of 2 12 LastLast

Similar Threads

  1. Main Slide Out - Dining Table/Theater Seats
    By AndyLynn in forum Exterior
    Replies: 4
    Last Post: 10-01-2017, 06:13 PM
  2. Dining Slide in 303 RLS-table hits island
    By Clsfly in forum Interior
    Replies: 9
    Last Post: 10-17-2015, 08:31 PM
  3. 2015 323BHS Dining Room Slide
    By droidguru in forum General Discussion
    Replies: 24
    Last Post: 10-27-2014, 08:12 PM
  4. Dining table issue
    By cuttinchief in forum General Tech Topics
    Replies: 9
    Last Post: 05-03-2014, 05:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.