Solitude 321X Converter location?

[Rollin Dog Pack]

I am in the process of installing a full 500W Solar panel, Charge controller system to charge my new 400AH Lithium battery pack. I need to find the OEM converter to replace it with a new Magnum MHS3012M pure sine wave unit. Does anyone out there know where the OEM unit is located?! Thanks for any feedback. Steve H.

[Namlehse]

I believe they're all in the main storage compartment behind a wall on the same side as the pluming. From what I've read, you just have to remove a handful of screws and the wall comes right off. I have to empty my storage out before I go looking, so I haven't made it very far yet.

[Kim and Bill]

Hey Rolling dog,
it is behind the wall in the storage compartment basically under the inside stairs. Be prepared for what you will see in there a real mess by my standards.
Bill

[Rollin Dog Pack]

Yeh, I just opened up the panel system and there is a real mess behind there for sure. Hasn't anyone ever heard of a vacuum cleaner before. I did find the converter and now I am in the process of chasing down the A/C & D/C wiring to and from it so I can install the new 3000W Magnum unit we're upgrading to. the new unit will require a 30Amp 120V A/C power feed so that will require new wiring as the OEM unit was only 20A. Then to boot, I want to have it installed up front in the "generator" compartment where I will be installing the "Head-end" equipment for my 500W Solar System! We are installing (3) 175W solar panels on the roof and a charge controller to feed a new 400AH Lithium Battery bank. We want to be able to boon-dock seriously, so this is the system I've designed to give us that capability.

[C&H Conner]

Post some pics of the progress, por favor! Always nice to see other peeps idea come into fruition.

[Rollin Dog Pack]

I did a "lay-out" of the (3) roof solar panels with the cardboard they came inside. (great idea, as they are nice and light!) got my patch cables measured/ordered and determined where I can run down thru the bedroom front closet to get to the basement. Have built & mounted my own tiltable mounts and as soon as it will be dry for 2-3 days, I'll get them set and sealed into place. Pained a new plywood equipment backboard (to help with the all black painted surfaces of the basement) and will start the equipment lay-out/ mounting next. Waiting on Amazon shippments! Make sure you look there for all R.V.,supplies, they KILL the R V store $'s!! I will post pic's along the way.

[chris]

The pictures that he wanted to post