User Tag List
Thanks: 0
Likes: 0
Results 1 to 3 of 3
-
05-03-2016, 07:07 PM #1
- Join Date
- Sep 2015
- Location
- S.E. Michigan
- Posts
- 97
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
337RLS Shower head bracket screws are loose
Has anyone else had this issue and how did they correct it? Oh, these are not just loose, the screws were over torqued and stripped out. I believe it was done by the factory, since the previous owner didn't do squat anything to this camper to either fix it themselves or have the dealer fix it.
I am tempted to cut an access hole in the closet, construction glue in a piece of 3/4" plywood and screw the bracket back on and into the plywood. Then I would have to work some magic and replace the paneling that was removed for access and make it look as good as new. I can do that.
I can do all that, but has anyone tried using those little plastic anchors for this issue and had long term success?MichiganMarty
2002 GMC 2500HD DuraMax
2014 Reflection 337RLS
Upgraded 2014 337RLS to a 2019 311BHS, Then Upgraded 2019 311BHS to 2020 367BHS
-
08-29-2017, 04:19 PM #2
- Join Date
- Sep 2015
- Location
- S.E. Michigan
- Posts
- 97
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
My fix: When I removed the bracket from the fiberglass wall, I could se the wall was a lot thicker than I anticipated. I stepped up one size on the screws (Stainless) and all is good.
MichiganMarty
2002 GMC 2500HD DuraMax
2014 Reflection 337RLS
Upgraded 2014 337RLS to a 2019 311BHS, Then Upgraded 2019 311BHS to 2020 367BHS
-
08-30-2017, 09:31 AM #3
- Join Date
- Jul 2014
- Location
- Wherever...
- Posts
- 9,016
- Mentioned
- 187 Post(s)
- Tagged
- 0 Thread(s)
For many years of repairing this type of thing on fiberglass boats, I just get a small amount of two-part expoxy (Lowe's or Home Depot) and patch/refill the holes. After the epoxy cures, I drill pilot holes the proper size and put the screws back in. That way I don't have to worry about oversize screws being to big for the fixture and cracking it.
RobU.S. Army Retired
2012 F350 DRW CC LB Lariat PS 6.7
2020 Solitude 310GK-R, MORryde IS, disc brakes,
Sailun LRG tires, solar, DP windows, W/D
(Previously in a Reflection 337RLS)
Full time since 08/2015
Similar Threads
-
Hilton Head Harbour RV Resort and Marina - HIlton Head, SC
By Rclbud in forum Campgrounds, Destinations and RV Trip PlanningReplies: 0Last Post: 06-26-2017, 02:41 PM -
Suffolk, VA to Hilton Head, Sc. 450 miles. To Hilton Head Harbor RV Resort and Marina
By Rclbud in forum Tow VehiclesReplies: 0Last Post: 06-24-2017, 05:56 AM -
Loose living room slide support bracket nuts.
By anyheading in forum FrameReplies: 0Last Post: 10-26-2016, 09:14 PM -
Black Metal Angle Strip On Floor Behind Couch - Screws Loose and Competely Out
By Canyonlight in forum InteriorReplies: 0Last Post: 08-26-2016, 09:35 AM -
337RLS Shower head bracket screws are loose
By MichiganMarty in forum InteriorReplies: 0Last Post: 05-03-2016, 07:07 PM
Frame Flex
Today, 07:32 AM in Frame