User Tag List
Results 11 to 20 of 26
Thread: Sun shade
-
06-18-2016, 09:17 AM #11
- Join Date
- Oct 2014
- Location
- Los Fresnos, Texas
- Posts
- 4,018
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thanks for that info
2018 Freedom Elite 24FE, 2 Yorkies, and my wife MARILYN, HAM call K0LCB. Traveling around this great country, making friends and seeing lot of beautiful and interesting places
-
06-19-2016, 11:56 AM #12
- Join Date
- Apr 2014
- Location
- El Paso, Texas
- Posts
- 29
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Quick and easy!!! Went to Home Depot and bought the fabric 6x20 for $40. Buy the clips also. I had some clamp awning connectors that prevent the awning from wind flapping. They connect to the awning with a twist clamp and to the rail with Velcro. I connected the wind de-flappers to the ends of the awning rail, attached the fabric, attached the fabric clips to the bottom. With a bungee cord and a stake it was secure. Easy up and easy down. Also rolls up compact with stakes in the middle and bungees holding it rolled up.
Hope it works.Art & Terry
2014 Solitude #366
2014 Ford F-450 Platinum 4x4 Duallie
Retired Police Officer '03/US Navy Vet 76-80
El Paso, Texas
-
06-19-2016, 12:46 PM #13SusieqGuest
Thanks, that sounds like just what I need. I will be ordering that!
-
06-21-2016, 10:53 AM #14
- Join Date
- Jun 2016
- Posts
- 35
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
2017 Ford F350 dually, Anderson Ultimate fifth wheel hitch
2016.5 Reflection 337RLS
-
06-21-2016, 12:47 PM #15
- Join Date
- Dec 2014
- Location
- Carlsbad, CA
- Posts
- 2,959
- Mentioned
- 10 Post(s)
- Tagged
- 3 Thread(s)
Sorry if my description mislead you but the OEM awning "drop" remains attached. It is not in the channel and does not interfere in any way with the new shade. Actually if you look very closely at my picture you can make out the OEM piece of fabric laying over the top section of the shade screeen
Paul "Poppy" and Deb Cervone
2022 Imagine XLS 22MLE
2021 Imagine XLS 17MKE - SOLD ; 2015 Grand Design Reflection 337RLS - SOLD
2016 GMC Denali 3500HD SRW Duramax/Allison CC 4x4; Tire Minder TPMS
-
11-29-2018, 12:08 PM #16
- Join Date
- Sep 2018
- Location
- Moreno Valley CA
- Posts
- 16
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I recently got a 2018 Solitude 310 GK and it too has the track (groove) in the awning roller, however the awning roller ends are covered with plastic? housings which connect the roller to the awning arms. There doesn’t appear to be a way to slide the top of a sun shade into the track because the housing are covering the ends of the track. As you probably know, sliding a sun shade into an awning track requires the sun shade to be nearly perfectly aligned with the track in order to slide in the shade so it doesn’t bind up.
Does your rig’s awning have the housing ends i’ve described; and if so, how did you get your sun shade to slide into the Track? Can the housing ends be removed to allow for the shade to be installed? If so, removing and reinstalling one or both of those housings would be problematic each time you moved to a new location. In that case, getting the detachable (zippered) sun shade seems like the only real option.
I would appreciate any one’s comments or suggestions on how to address this issue.
-
12-08-2018, 06:51 AM #17
- Join Date
- May 2017
- Location
- Weymouth,MA
- Posts
- 155
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I used the carefree ez zipper on both my awnings. Once installed in the grove the top 2’ stay in and just unzip the lower part for easy removal and zip it back on for install. No ladders needed after set up.
Works great!!!Don & Gayle
3 fur babies
2016 solitude 375re
2015 Chevy Silverado 3500 SRW crew cab short bed LTZ Z71 Duramax
Rear timbren suspension blocks
PullRite super glide 24k auto-slide
Morryde rubber pin box
Sailun G637
-
12-11-2018, 05:42 PM #18
- Join Date
- Mar 2014
- Location
- Sumner, Michigan
- Posts
- 183
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I have a 2019 Solitude 2930 and have the same question on installing the two foot section of my shade. On my Reflection, it was easy to "roll" the awning a little, feed the sun shade section into and good to go. The Solitude doesn't appear to have access like the old awning did. Has anyone installed theirs? Do the end pieces of the awning snap off and give you access to the groove?
Jim and Cecille
Sumner, MI
2019 Solitude S-Class 2930RL #1098
Used to be 2014 Reflection 337RLS #277
2015 Chevy 2500HD Duramax 6.5' Box
-
12-11-2018, 06:31 PM #19
- Join Date
- May 2017
- Location
- Weymouth,MA
- Posts
- 155
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
On mine there are six screws on the top of the cover that come undone to take the plastic housing off and access the groove to slide it in. Or if you extend the awning further than normal it brings the groove to the top and you can slide it in that way a little harder to keep it perfectly aligned but it works as well. I will tell you the plastic caps on the housing are not the easiest to put back in place but it can be done. Hope this helps.
Don & Gayle
3 fur babies
2016 solitude 375re
2015 Chevy Silverado 3500 SRW crew cab short bed LTZ Z71 Duramax
Rear timbren suspension blocks
PullRite super glide 24k auto-slide
Morryde rubber pin box
Sailun G637
-
12-11-2018, 08:56 PM #20
- Join Date
- Sep 2018
- Location
- Moreno Valley CA
- Posts
- 16
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
As a follow up, this last weekend I pulled my trailer out to do some basic maintenance and got my (tall) ladder to more closely inspect the awning roller and how it connects to the awning arms. I had hoped there might be an opening along the top where one could slide a sun shade into the roller track, but no there isn’t. So I then tried to remove the plastic housings, with the hope I would then be able to access the roller track’s edge, but while I was able to get a couple of pressure snaps to release I couldn’t get the whole housing to come off, and I was getting afraid any further prying would cause the housing to break, so I gave up and snapped everything back into place. Unfortunately, mine doesn’t have any screws on the top.
Hopefully there is someone out there who has figured out how to past those housings so I can install my sun shade. Any suggestions would be very much appreciated.
Similar Threads
-
AMSolar Solar Panel Tilt Brackets vs N AZ Wind & Sun Universal Tilt Brackets
By Dagwood_55 in forum Mods and DIYReplies: 5Last Post: 07-27-2017, 07:27 PM -
Awning - Sun Screen
By ADT_48 in forum ExteriorReplies: 7Last Post: 06-26-2017, 09:51 PM -
Awning sun screen
By cuttinchief in forum General DiscussionReplies: 2Last Post: 04-19-2014, 08:30 AM
Freeze Concern
Today, 09:09 PM in Plumbing and Water Systems