Under belly filled with water, then tears underbelly off Reflection 323 BHS & 337RLS

[Vargasvinyls]

So, my neighbor and I both have 2015 reflections. Mine being a 323BHS and his a 337RLS. We both have had an issue with water collecting in the underbelly, under the black tank side just right of the door. Both of our underbellys actually ended up ripping out! It was clean fresh water, but very odd that it happened to both of ours, and the water collected in the same spot. Anybody have the same issue, know what the issue is?
Thanks

[zac808]

Do you have the Kantleak valve system? Lots of problems with them. It could be leaking and making its way down to the underbelly.

[mbaker]

Do you have the Kantleak valve system? Lots of problems with them. It could be leaking and making its way down to the underbelly.

That's exactly what's going on. Find that leak.

Ben

[Vargasvinyls]

I do have that system. Any clue where the main culprit is?

[JCR GD]

I do have that system. Any clue where the main culprit is?

Look at the back side of the panel. Could be a connection to the panel or in the cross over tee build into the panel. There are many other connections in that area that it could be also.

[zac808]

I do have that system. Any clue where the main culprit is?

Search through the forum for Kantleak. Lots of threads with pics.

[orbiker]

The P trap came loose on our 380TH. Needless to say; it drown the underbelly. Paul Evert's in Coburg, Oregon fixed and replaced the insulation.