User Tag List
Thanks: 0
Likes: 0
Results 1 to 4 of 4
-
11-03-2016, 03:05 PM #1edmondpaganGuest
Can i move the Dining room table?
Hello,
I found that the previous owners of our Solitude had removed the dining room table and theater seating to put in a desk.
Well they gave us the table and chairs along with the theater seats and screws that originally held them in place. I was looking to screw them back in but wanted to know if they have to go into the exact same location?
I would like to move the table over to the side so we could have more room between the table and theater seating but didn't know if changing the location would put the screw through the bottom of the slide or scratch the floor when pulled in.
I know it will clear the Island when the slide comes in.
thanks,
Eddie&Aimee
-
11-03-2016, 03:13 PM #2
It should be no problem as long as the screws aren't too long. You can pretty much put it where you want.
Jim
-
11-03-2016, 03:53 PM #3
After you install the table and theatre seating, go under the slide and inspect very carefully for any screw tips. If all is clear, you will be fine.
RobCate & Rob
2015 Reflection 303RLS
-
11-03-2016, 08:23 PM #4edmondpaganGuest
Sounds good, thanks for the advice.
Eddie&Aimee
Similar Threads
-
Dining table straps
By graynomad in forum General DiscussionReplies: 6Last Post: 10-27-2015, 10:04 AM -
Lights above dining table in 337rls
By tjsmiley72 in forum General DiscussionReplies: 8Last Post: 08-21-2015, 12:48 PM -
Marks on floor from dining table/theater seating slidout.
By D Hardison in forum InteriorReplies: 1Last Post: 10-22-2014, 08:48 AM -
Dining table issue
By cuttinchief in forum General Tech TopicsReplies: 9Last Post: 05-03-2014, 05:46 AM
Re-pack bearings necessary?
Today, 09:29 PM in Axles, Brakes, and Suspension