Drawer Removal

[gerrym]

Hello,

I have looked and searched for answer to this. How I take the drawers out in my new Reflection?

I know this must be a pretty simple thing, however, I have not figured it out.

BTW: I paid for the forum a bit ago on paypal. When will I be able to see the pictures in the messages?

Gerry M
2017 Reflection 26RL

[JCR GD]

Not sure if all model drawer slides are the same but there should be a small black plastic lever looking thing on each side in the channel of the slide. Push up or down as you pull out and it should release.

You may have to restart your browser for the site to reset and allow access (if it hasn't yet.)

[RVRunners]

Yes JCR GD is correct. Small plastic (usually black) levers integrated into the sides of the ball bearing drawer guides. Guides are typically the same when you get them out of a paired package so one lever will move up and the other will move down. This will realease the drawer. When re-inserting the drawer you just need to stabilize the part of the guide that remains in the cabinet so that when you push the drawer back in you hear a click on each side. Good luck!

[JohnSWood]

This is exactly what I needed to know. I’d looked and looked, twisted and torqued... felt and ...but until I put a flashlight to the side I could get to.... after that it was easy!

Now, to rebuild the drawer. Who’d have thunk... 4 bottles of wine overloaded the drawer and it completely fell apart. It won’t next time. Glue and bottom backers.