Show your basement mods

[jbailey]

Ben
Can we see your drawer and lighting project?

Orbiker,
Here are a few more pictures of the drawer, I posted a thread about redoing the inside steps here: http://www.mygrandrv.com/for...=Bedroom+Steps. If you look at this tread you can see there was a little dead space under the first stair tred, where I had to angle the step back to the door. I had to cut a hole in the basement wall and move the electrical outlet. I used the spot for the cable connection for the new socket location but didn't mind, as we don't have a basement TV or have plans to add one. After that it was just adding drawer slides and putting the drawer box together.

[jbailey]

Ben, is that a clear plastic window in one of the pictures? If so, where is that at and what's it purpose?

QuadGuy,
It is a clear window that slides open so I can access the back of the KantLeak panel to verify if the panel is leaking or not. I can also check the pressure for my Water Tank from the window if I notice a pressure drop before the water pump comes on. I actually got the idea from Rob, I did a quick search and could not find his thread, but here is the link to mine: http://www.mygrandrv.com/for...asement+Window.

Ben

[orbiker]

Orbiker,
Here are a few more pictures of the drawer, I posted a thread about redoing the inside steps here: http://www.mygrandrv.com/for...=Bedroom+Steps. If you look at this tread you can see there was a little dead space under the first stair tred, where I had to angle the step back to the door. I had to cut a hole in the basement wall and move the electrical outlet. I used the spot for the cable connection for the new socket location but didn't mind, as we don't have a basement TV or have plans to add one. After that it was just adding drawer slides and putting the drawer box together.

Very nice and a useful handle on the drawer.

[hazmat]

Appreciate the inspiration. I installed a shelf this weekend enjoying it so far.

[robhotdog]

Same question as yattr0, how did you get by the black pipe when mounting storage slides to frame rail? spacer blocks? Thanks, Looks great! Rob

[sknight603]

Attachment 7013
Pegboard fastened to wall tight so hooks stay in place

Is the wall sheet metal or wood behind the fabric?

[orbiker]

Is the wall sheet metal or wood behind the fabric?

I believe it is 3/4" plywood and then sheet metal (in my 2016 380TH ).

[LCBoyer]

Is the wall sheet metal or wood behind the fabric?

It 1/2" OSB

[sknight603]

There is not a lot of wall room in the basement on the 28BH. So, I added a rail along the top, with some steel rings and carabiner clips.

[orbiker]

There is not a lot of wall room in the basement on the 28BH. So, I added a rail along the top, with some steel rings and carabiner clips.

That's a nice looking squeegee. How long does it extend?

Thanks, KEN