Quote Originally Posted by roegs01 View Post
I realize this is an older thread, but its my exact problem. Firt thanks to the person that provided Lippert's instructions. Second, agree with others that this is a pretty big snafu on Lippert's part. All they would have needed to do is machine off the small ridges in the center of the C channel that hold the latches in place. A person could then remove the phillips screw holding the latches in place and simply slide them to the center of the channel where they could be removed. Before removing the window assembly I'm going to try to file down the C channel ridges in the center and see if I can swap latches that way. Lippert sells touch up paint that I'll use to clean up....
I have the exact same issue. Did you have any success?

Thanks