Winegard 360+ in a 2022 Reflection Install Questions

[EddieK82]

Hi,

I'm about to install this device in my Reflection. I have the loop in my ceiling. Are these the steps I need to take?

1. turn off power to the coach and disconnect battery (I don't want to mess with the fuse box)
2. Cut the loop
3. Connect the harness black to the loop white and use a cap
4. Connect the harness red to the switch.
5. Connect another wire? to the switch and tie into loop with the orange line on it. What size wire do I need for this?
6. Activate the new sim and test.
7. If testing works, stuff it all back into the ceiling and mount it.

Do I have that right?

I'm assuming I have to poke another hole in the ceiling to run the switch wires to and mount that.