User Tag List
Likes: 0
Results 1 to 6 of 6
-
07-27-2018, 02:14 PM #1
-
07-27-2018, 02:21 PM #2
Hard to believe the fan was blowing into the back of it's case instead of out the opening.now with the correct orientation it moves quite a bitAttachment 14164Attachment 14164Attachment 14164Attachment 14164Attachment 14164a bit of air.Attachment 14163
-
07-27-2018, 02:33 PM #3
Reminds me of a friend had a brand new Ford right from the factory no oil pressure.Found a Big Mac wrapper inside the oil pan blocking the oil pump pickup tube
Built on a Monday.
-
07-27-2018, 02:47 PM #4
- Join Date
- Dec 2014
- Location
- Fountain Valley, CA
- Posts
- 2,254
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
We had a Kenworth and from day one I could fart harder than the air coming out of the vents. Years later there was a noise coming from the squirrel cage area, so I needed to take apart the blower...Something simple, a leaf had got in there. However, when looking the squirrel cages (there were 2), one was facing the right way, the other was not. Took it off the shaft, spun it around. At first, a ton of dust came out of the vents. After that, worked like a charm!
Curtis, Christine, Cole, and Charlotte
2007 Chevrolet Silverado Duramax LBZ, CCLB
2020 Momentum 351M
-
07-27-2018, 03:01 PM #5
This is a terrific post. Thanks for sharing it. And excellent trouble-shooting skills by the way.
Jim
-
07-27-2018, 03:09 PM #6
Check those tires!
Today, 03:33 PM in Tires