User Tag List
Thanks: 0
Likes: 0
Results 1 to 8 of 8
Thread: Lippert 3.0 Auto Leveling
-
06-12-2019, 05:16 PM #1
- Join Date
- Jun 2018
- Posts
- 3
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Lippert 3.0 Auto Leveling
We have a 2018 Reflection 29RS. Every time I try to auto level the camper it will lift the right side wheels off the ground. Even if the left side is the low side it will still raise the right side wheels off the ground. I have rehomed the jacks and reset the zero point calibration , nothing seems to help. The dealer is over a month out to get in to get it checked. Any ideas would be appreciated.
Thanks
Lin
-
06-12-2019, 05:58 PM #2
- Join Date
- Feb 2019
- Location
- "Murvul", TN
- Posts
- 3,435
- Mentioned
- 138 Post(s)
- Tagged
- 0 Thread(s)
You might check the level sensors to make sure that they are...1. Mounted correctly..they have a sticker on them that tells the correct orientation...which side down. 2. Make sure that the sensors are not loose and are securely mounted. The location of these sensor vary in location, so you may have to search for them...or hopefully, someone with your exact model trailer will chime in and help you as to location.
2016 F350 CrewCab Dually
2018 Momentum 394M...Heavily Modded!
2023 Suzuki GSX-S1000 GT+
Excessive Payload is a Wonderful Thing
"If it ain't fast....It ain't Fun"
-
06-12-2019, 06:48 PM #3
- Join Date
- Jun 2018
- Posts
- 2,356
- Mentioned
- 16 Post(s)
- Tagged
- 0 Thread(s)
I have not had this problem (hopefully). The controller boards and sensors are located in the front storage , middle top , right above the door. I agree with @xrated to make sure they are secure and mounted correctly. They are labeled to which jack they control. I am interested it what is found to be the fix.
Brian
-
06-12-2019, 07:32 PM #4
- Join Date
- Jun 2018
- Posts
- 3
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thanks I will check these tomorrow.
-
06-12-2019, 09:14 PM #5
- Join Date
- Mar 2019
- Location
- Davenport, Iowa
- Posts
- 32
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Same thing on my 2018 29 RS..Loooong story short ,Right rear level sensor installed upside down.
I did not see the tech repair it so I am not sure where it is located. Drop coroplast. ?????????
It is marked with an arrow but it might have been a Monday assembly. You can still level it
Manually.
-
09-23-2019, 10:27 PM #6
- Join Date
- May 2019
- Posts
- 3
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
How do you reset zero point calibration with this key pad?
-
09-24-2019, 08:59 AM #7
-
09-24-2019, 09:32 AM #8
- Join Date
- May 2019
- Posts
- 3
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Axles Worn Out - What To Do?
Today, 09:44 AM in Axles, Brakes, and Suspension