User Tag List
Results 11 to 20 of 27
Thread: Finally picked up our new 3740BH
-
04-02-2019, 05:31 PM #11
Congrats from Wv
NAVY 1980-1984
2022 Reflection 337 RLS
2023 GMC SierraDenali 2500 HD
Anderson ultimate hitch
-
04-02-2019, 09:12 PM #12
- Join Date
- Aug 2018
- Location
- Vancouver, B.C.
- Posts
- 152
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
The trailer did seemed a bit pin light to me... so I weighed it... a hair over 2000lbs. Only thing added from factory is full propane tanks and a 2/3 full tank of water. I have the schematic and the fresh tank is over the trailer axles and should not affect pin weight all that much. Guess I have plenty of left over room for a washer/dryer combo given my payload is 3840... evening taking into account passengers, extra fuel tank and hitch!
Last edited by bcdiesel; 04-02-2019 at 09:52 PM.
Trailer: 2019 Solitude S-Class 3740BH
Old trailer: 2016 Outdoors RV Creekside 27DBHS (Sold)
Old trailer: 2010 Heartland Sundance 3300RLB (always leaked, then rotted! Layout was good, but build was junk.)
Old trailer: 1992 Prowler 5th 27.5N
Truck: 2016 Ram 3500 Cummins Megacab 4x4 SRW Laramie Aisin
Old truck: 2012 Ram 3500 Cummins Megacab 4x4 SRW Laramie 68RFE
Old truck: 2003 Ram 3500 Cummins QuadCab 4x4 SRW Laramie 6spd
-
04-02-2019, 09:15 PM #13
- Join Date
- Aug 2018
- Location
- Vancouver, B.C.
- Posts
- 152
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Trailer: 2019 Solitude S-Class 3740BH
Old trailer: 2016 Outdoors RV Creekside 27DBHS (Sold)
Old trailer: 2010 Heartland Sundance 3300RLB (always leaked, then rotted! Layout was good, but build was junk.)
Old trailer: 1992 Prowler 5th 27.5N
Truck: 2016 Ram 3500 Cummins Megacab 4x4 SRW Laramie Aisin
Old truck: 2012 Ram 3500 Cummins Megacab 4x4 SRW Laramie 68RFE
Old truck: 2003 Ram 3500 Cummins QuadCab 4x4 SRW Laramie 6spd
-
04-02-2019, 09:19 PM #14
- Join Date
- Aug 2018
- Location
- Vancouver, B.C.
- Posts
- 152
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Trailer: 2019 Solitude S-Class 3740BH
Old trailer: 2016 Outdoors RV Creekside 27DBHS (Sold)
Old trailer: 2010 Heartland Sundance 3300RLB (always leaked, then rotted! Layout was good, but build was junk.)
Old trailer: 1992 Prowler 5th 27.5N
Truck: 2016 Ram 3500 Cummins Megacab 4x4 SRW Laramie Aisin
Old truck: 2012 Ram 3500 Cummins Megacab 4x4 SRW Laramie 68RFE
Old truck: 2003 Ram 3500 Cummins QuadCab 4x4 SRW Laramie 6spd
-
04-02-2019, 09:20 PM #15
- Join Date
- Aug 2018
- Location
- Vancouver, B.C.
- Posts
- 152
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Last edited by bcdiesel; 04-02-2019 at 09:52 PM.
Trailer: 2019 Solitude S-Class 3740BH
Old trailer: 2016 Outdoors RV Creekside 27DBHS (Sold)
Old trailer: 2010 Heartland Sundance 3300RLB (always leaked, then rotted! Layout was good, but build was junk.)
Old trailer: 1992 Prowler 5th 27.5N
Truck: 2016 Ram 3500 Cummins Megacab 4x4 SRW Laramie Aisin
Old truck: 2012 Ram 3500 Cummins Megacab 4x4 SRW Laramie 68RFE
Old truck: 2003 Ram 3500 Cummins QuadCab 4x4 SRW Laramie 6spd
-
04-02-2019, 11:41 PM #162023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
04-03-2019, 06:11 AM #17
- Join Date
- Mar 2018
- Location
- Near Pittsburgh, PA
- Posts
- 489
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
Tom and Janice (known as Tom in PGH on the “other” forum)
First came the 18' Comfort bumper-pull, was great for 20 years.
Now a 2019 Reflection 303RLS, second air, double glass, table and chairs
2019 F350 Lariat (Diesel) 4x4 Crewcab with lots of goodies
Andersen aluminum with the puck system holding it all together
Cranberry Twp. PA, about 30 miles north of Pittsburgh
-
04-03-2019, 09:29 AM #18
- Join Date
- Aug 2018
- Location
- Vancouver, B.C.
- Posts
- 152
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Knowing that I'd be close on payload and pin weight with a SRW truck I wanted to know grey/black/fresh tank locations so I could guesstimate the effect of full tanks on pin weight. My original request to Grand Design for a drawing showing tank locations was denied citing proprietary information. When I responded back and advised that as a SRW owner this information was a necessity and they could be liable if they chose to not give me this crucial information. I was then provided a basic screen snap of the chassis schematic with all 5 tanks. I was told not to share this information and agreed. So sorry, but can't post it!
Trailer: 2019 Solitude S-Class 3740BH
Old trailer: 2016 Outdoors RV Creekside 27DBHS (Sold)
Old trailer: 2010 Heartland Sundance 3300RLB (always leaked, then rotted! Layout was good, but build was junk.)
Old trailer: 1992 Prowler 5th 27.5N
Truck: 2016 Ram 3500 Cummins Megacab 4x4 SRW Laramie Aisin
Old truck: 2012 Ram 3500 Cummins Megacab 4x4 SRW Laramie 68RFE
Old truck: 2003 Ram 3500 Cummins QuadCab 4x4 SRW Laramie 6spd
-
04-03-2019, 12:08 PM #19
- Join Date
- Oct 2016
- Posts
- 1,539
- Mentioned
- 13 Post(s)
- Tagged
- 0 Thread(s)
Is this top secret information worth your life, Mr. Powers?? Or how about we give you, say, one BILLION dollars?
I've seen the tank locations on my trailer, very scientific. In general they cram the waste tanks in closest to their source and the FW tank in whatever space is left over. Grand Design would do their customers a real solid if they could give up the details of their space age wiring, plumbing and tank placement.
Congrats on your new S Class. I have my eye on the 2930. I'm surprised your pin weight is so low. Usually GDRV's unloaded pin and tongue weights are quite optimistic. Hope you post your pin weight after you're loaded up.
-
04-03-2019, 03:18 PM #20
- Join Date
- Aug 2018
- Location
- Vancouver, B.C.
- Posts
- 152
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Trailer: 2019 Solitude S-Class 3740BH
Old trailer: 2016 Outdoors RV Creekside 27DBHS (Sold)
Old trailer: 2010 Heartland Sundance 3300RLB (always leaked, then rotted! Layout was good, but build was junk.)
Old trailer: 1992 Prowler 5th 27.5N
Truck: 2016 Ram 3500 Cummins Megacab 4x4 SRW Laramie Aisin
Old truck: 2012 Ram 3500 Cummins Megacab 4x4 SRW Laramie 68RFE
Old truck: 2003 Ram 3500 Cummins QuadCab 4x4 SRW Laramie 6spd
Need help with Imagine 2600 RL
Today, 10:46 AM in General Discussion