Sewer Hose Holder

[Bill G]

I was able to get 20 feet of hose into my '17 297RSTS holder. How many hoses do you have attached?

[duke13]

Hi Poppy ! I like your idea . Can you help me understand how you mounted the storage hose fence unit? I have a 2016 reflection 303 5th wheel and am trying to figure how to mount the storage hose fence post unit like you have, I am not sure how to mount my storage hose unit. I don't want to drill a hole and cause a problem. I appreciate any help you can provide. I can't see the mounting you have from the pictures. Looks good. Thanks Duke .

[jkwilson]

Hi Poppy ! I like your idea . Can you help me understand how you mounted the storage hose fence unit? I have a 2016 reflection 303 5th wheel and am trying to figure how to mount the storage hose fence post unit like you have, I am not sure how to mount my storage hose unit. I don't want to drill a hole and cause a problem. I appreciate any help you can provide. I can't see the mounting you have from the pictures. Looks good. Thanks Duke .

These beam clamps https://www.lowes.com/pd/STEEL-CITY-...-Clamp/3306532 anchored to the frame I-beams.

I copied the idea myself, though I put a steel plate inside the posts and put carriage bolts through it to connect to the clamps.

[duke13]

Hi John. thanks for the information. I did buy these clamps like you suggest but am not sure how you mounted yours. I think you have a good thing . Can you give me an idea how you installed the ( I put a steel plate inside the posts and put carriage bolts through it to connect to the clamps. ) sorry I am so fuzzy on the install. also where did youmount yours? looks like Poppy mounted his close to the rear jacks. again thanks for your help. Duke

[jkwilson]

Hi John. thanks for the information. I did buy these clamps like you suggest but am not sure how you mounted yours. I think you have a good thing . Can you give me an idea how you installed the ( I put a steel plate inside the posts and put carriage bolts through it to connect to the clamps. ) sorry I am so fuzzy on the install. also where did youmount yours? looks like Poppy mounted his close to the rear jacks. again thanks for your help. Duke

I’ll try to get a picture. I don’t have lights in the barn so it’s hard to get good pictures.

[duke13]

That would be nice. Thanks John. Did you remove the small sewage hose holder from your trailer?

[Gold Country Livin']

Here you go. This is mine which I copied from Poppy's 5th I believe or others similar. If you scroll down through this thread, there are other pictures. This has been a tried and proven system.

[duke13]

Thanks Gold country, That looks good. Did you have to put locktite on the large bolt that secures the clamp to the trailer frame? Or cut away the underbelly material so the clamp is directly in contact with the trailer frame? Thanks for the input.. Duke13

[duke13]

Hi Blair, I like your setup for the ladder. I am wanting to install a better sewage hose storage unit. When I look at this on Amazon
( 7054900 TransRack Conduit Carrier) all I see is the two end caps and the brackets to install the unit. Can you get a door on both sides? I do like the si ze 6". Thanks for any information you can provide. Duke

[Paul & Deb]

duke13, I use the same fence post cover setup for my flag pole, hiking sticks, fishing poles, sewer hoses and ladder. I installed 2 at the rear of the trailer and 1 buy the sewer outlets.





BTW, this is the ladder I have carried for the last 5 years.

https://www.amazon.com/Telesteps-700...ateway&sr=8-13