User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6
  1. #1
    Setting Up Camp
    Join Date
    Jan 2021
    Location
    Waterdown ontario
    Posts
    35
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Front axle weight

    Took my brand new 310 GK and 3500 ram dually to i the cat scales today: I use an Anderson hitch and with the trailer on the front axle weight was 140 pounds less than the truck with no trailer. I think this is because I have the coupling block in front of the fifth pin. Do I need to be concerned do you think? I like the Anderson. Lots of turning space so don’t want to rotate the coupler if not needed
    Paul,Judy and Ember
    2021 310gk
    2019 ram 3500 mega cab dually diesel
    Andersen hitch

  2. #2
    Site Team traveldawg's Avatar
    Join Date
    Aug 2017
    Location
    Florida Space Coast
    Posts
    3,853
    Blog Entries
    1
    Mentioned
    94 Post(s)
    Tagged
    0 Thread(s)
    It sounds to me that because of the way you oriented the hitch you took weight off the front wheels to allow more turning room to clear the cab. It sounds like the pin of the fifth wheel is now behind the rear axel thus lowering the weight on the front axel.

    I think traditionally the pin of the fifth wheel should be either over the rear axel or slightly forward. This results in proper weight distribution on the tow vehicle.

    If your set up is as I expect then the more you load the 5th wheel, the lighter your front end is going to get on your truck.

    Personally I prefer to have the 5th wheel pin over or forward of the rear axel.

    I have no idea if the way you are set up needs to be a concern or not. I expect others will chime in soon.
    Larry KE4DMG
    2022 F-350 KRU SRW LB - Airlift 5000+, ForScan, 37 RDS Aux Tank,
    2019 310GK-R - Sailuns; MorRyde IS; Disc Brakes; 20K Reese Goosebox
    Search kalakamods for my mods


  3. #3
    Site Sponsor Jerryr's Avatar
    Join Date
    Nov 2016
    Location
    Florida
    Posts
    2,822
    Mentioned
    30 Post(s)
    Tagged
    0 Thread(s)
    NOT A PROBLEM! It’s not because of how you mounted the Andersen coupler.

    If you look closely at the Andersen hitch the Andersen ball is 4” BEHIND the truck bed goose ball. The truck bed goose ball is essentially directly over the rear axle. So the force vector is applied on the Andersen ball which puts the force 4” behind the truck axle.
    Jerry & Linda
    Emma & Abby our Mini Golden Doodles & JR our Amazon Parrot
    2017 Reflection 337RLS, Build Date 01/2017, Titan Disk Brakes, Goodyear G614s 235/85/16 G Rated tires
    2022 F-450 King Ranch Ultimate, 4,868 lb Payload, Bedrug Bedliner, Andersen Ultimate II Aluminum 5th wheel hitch
    http://visitedstatesmap.com/image/FLGANCSCsm.jpg

  4. #4
    Setting Up Camp
    Join Date
    Jan 2021
    Location
    Waterdown ontario
    Posts
    35
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Jerryr View Post
    NOT A PROBLEM! It’s not because of how you mounted the Andersen coupler.

    If you look closely at the Andersen hitch the Andersen ball is 4” BEHIND the truck bed goose ball. The truck bed goose ball is essentially directly over the rear axle. So the force vector is applied on the Andersen ball which puts the force 4” behind the truck axle.
    Yes the ball on the hitch is behind the axle and when I put the Cupler in front of the king pin it push it back even further on the back axle.So I know why it’s happening I just want to know if I should be concerned with weight coming off the front axle and how much could come off before I have a problem
    Paul,Judy and Ember
    2021 310gk
    2019 ram 3500 mega cab dually diesel
    Andersen hitch

  5. #5
    Site Sponsor Jerryr's Avatar
    Join Date
    Nov 2016
    Location
    Florida
    Posts
    2,822
    Mentioned
    30 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Kretzer View Post
    Yes the ball on the hitch is behind the axle and when I put the Cupler in front of the king pin it push it back even further on the back axle.So I know why it’s happening I just want to know if I should be concerned with weight coming off the front axle and how much could come off before I have a problem
    The physics of the force vector on the truck doesn’t change if the coupler is mounted in standard position or reverse position because the force is applied to the Andersen ball which is fixed in place. The fulcrum is the rear axle and the moment arm is the distance from the rear axle and the Andersen ball. That moment arm doesn’t change if you flip the coupler.

    The only thing that changes is the amount of force the trailer applies to the Andersen ball due to the moment arm changing in the trailer, between the coupler socket and the trailer wheels. Even that is very slight.

    Everyone with an Andersen hitch will lighten the weight on the front axle because the Andersen ball is behind the truck axle. Mine reduces the front axle weight by about 100 lbs. it’s nothing to worry about.

    The only way to reduce the effect is to move the hitch forward so the the Andersen ball is more forward.
    Jerry & Linda
    Emma & Abby our Mini Golden Doodles & JR our Amazon Parrot
    2017 Reflection 337RLS, Build Date 01/2017, Titan Disk Brakes, Goodyear G614s 235/85/16 G Rated tires
    2022 F-450 King Ranch Ultimate, 4,868 lb Payload, Bedrug Bedliner, Andersen Ultimate II Aluminum 5th wheel hitch
    http://visitedstatesmap.com/image/FLGANCSCsm.jpg

  6. #6
    Setting Up Camp
    Join Date
    Jan 2021
    Location
    Waterdown ontario
    Posts
    35
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Jerryr View Post
    The physics of the force vector on the truck doesn’t change if the coupler is mounted in standard position or reverse position because the force is applied to the Andersen ball which is fixed in place. The fulcrum is the rear axle and the moment arm is the distance from the rear axle and the Andersen ball. That moment arm doesn’t change if you flip the coupler.

    The only thing that changes is the amount of force the trailer applies to the Andersen ball due to the moment arm changing in the trailer, between the coupler socket and the trailer wheels. Even that is very slight.

    Everyone with an Andersen hitch will lighten the weight on the front axle because the Andersen ball is behind the truck axle. Mine reduces the front axle weight by about 100 lbs. it’s nothing to worry about.

    The only way to reduce the effect is to move the hitch forward so the the Andersen ball is more forward.
    Awesome thanks
    Your comments brought back my high school physics class LOL
    Paul,Judy and Ember
    2021 310gk
    2019 ram 3500 mega cab dually diesel
    Andersen hitch

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.