User Tag List
Results 1 to 10 of 27
Thread: Morryde 3000 on 19 Imagine 2800
-
02-07-2019, 11:54 AM #1
- Join Date
- Aug 2018
- Location
- Panama City Beach FL
- Posts
- 204
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Morryde 3000 on 19 Imagine 2800
Has anyone installed the Morryde 3000 system on a 2019 Imagine 2800BH? I am having new 4400 lb axles and springs installed and want to install the Morryde system. I have completed the Morryde qualification except for the tire to wheelwell clearance. I have the 3500lb axles and the springs are flat so I won’t have accurate measurements.
2019 GMC 2500 HD Denali
2021 Reflection 337RLS / EMS HW50C
Reece 20K Goosebox
Solid Step
-
02-07-2019, 08:39 PM #2
- Join Date
- Oct 2018
- Location
- Red Bluff, Ca.
- Posts
- 72
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
The 4400# springs should here tomorrow and I'll be putting in the Morryde equalizers and wet bolts as well. Looks fairly straight forward to install and should get a little more lift with the Morryde. Since I have the lippert 3500# axles with the 3 inch tube GDRV said we should be okay, time will tell. If the clearance isn't enough I will put in spacer blocks to bring up the height and to level the trailer with whatever thickness they need to be. I'm going for 4 inches of clearance. The units I looked at with the 4400# axles and springs sit up at least that much but if they don't go less than 3 and a half inches of clearance after loading up should be good enough.
2020 Ford F350 6.7
2018 2800BH Imagine
And a couple of Polaris RMK snowmobiles :cool:
-
02-08-2019, 08:28 AM #3
- Join Date
- Aug 2018
- Location
- Panama City Beach FL
- Posts
- 204
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Thanks for the reply. I too have looked at spacers if there isn't enough clearance.
2019 GMC 2500 HD Denali
2021 Reflection 337RLS / EMS HW50C
Reece 20K Goosebox
Solid Step
-
02-09-2019, 08:18 AM #4
I put the 3000 system on our 19 2400bh last fall. We did one short trip and then it was time for storage. Looking forward to really trying it out this spring. Our springs are not flat, and we gained about 1/2-3/4" of clearance.
Jim2019 F350 6.7L PS SRW CCSB Platinum
2021 28BH with theater seating and 2nd AC
2019 Imagine 2400BH w/solar (sold)
https://rolling.howardweb.info/
-
02-09-2019, 09:09 AM #5
- Join Date
- Aug 2016
- Location
- Michigan
- Posts
- 1,099
- Mentioned
- 8 Post(s)
- Tagged
- 0 Thread(s)
I found the same additional height gain when installing my CRE-3000 on my 2600RB. I started with new 3500 lb springs and also added one inch spacer blocks. Once this additional height is achieved with the MORryde equalizers you may not need the blocks and can monitor for contact to determine if they are needed. I moved up to the next size up in tire to get an E rating where I lost 1/2 inch in height so I installed the blocks along with the CRE-3000 units. In the spring I will also be installing the MORryde X factor bracket to stiffen up the center hanger.
Last edited by MidwestCamper; 02-09-2019 at 09:12 AM.
MidwestCamper
Jim & Dawn
Near Milford, Michigan
2017 Imagine 2600RB
2015 GMC Sierra 1500 Double Cab 4x4
-
03-11-2019, 12:48 PM #6
- Join Date
- Sep 2018
- Posts
- 26
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
03-11-2019, 01:18 PM #7
- Join Date
- Aug 2018
- Location
- Panama City Beach FL
- Posts
- 204
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Here is a before and after shot of my axles/springs.
2019 GMC 2500 HD Denali
2021 Reflection 337RLS / EMS HW50C
Reece 20K Goosebox
Solid Step
-
03-11-2019, 02:06 PM #8
- Join Date
- Jan 2018
- Location
- Northern Illinois
- Posts
- 238
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Where do you go to get this kind of work done? I'm also concerned about price...how bad is it?
Vince and Peg
Kennedy (Bernese Mountain Dog)
2017 Chevy Suburban Premier Edition w/max tow pkg.
2018 GD Imagine 2600RB
-
03-11-2019, 02:14 PM #9
- Join Date
- Sep 2018
- Posts
- 26
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
03-11-2019, 04:36 PM #10
I didn't do brakes, just the 3000 and the wet bolt kit. The wet bolt kit is about $100 and the CRE 3000 kit is about $150.
I grew up on a farm and built and raced cars for years, so any work like this happens on the pad in front of my shop.
If you go this route, put solid valve stems in the wheels and balance the tires too, since they will be off of the trailer.
Jim2019 F350 6.7L PS SRW CCSB Platinum
2021 28BH with theater seating and 2nd AC
2019 Imagine 2400BH w/solar (sold)
https://rolling.howardweb.info/
Charging Lithium Batteries From...
Today, 05:43 AM in Electrical System and Wiring