295RL slide out motor location

[rdnkjeeper]

I've been having problems with one of the slide outs on my unit. I know that is what warranty is for, but I like to know how to fix stuff at a later date. Anyway, the fuses are good, the circuit breakers are good, my battery is good, the switch is switching. I broke out the manual and it say to try to reset the auto breaker on the motor. OK, Where is the motor? Do I have to drop the cryoplast?

Thanks

[gbkims]

I've been having problems with one of the slide outs on my unit. I know that is what warranty is for, but I like to know how to fix stuff at a later date. Anyway, the fuses are good, the circuit breakers are good, my battery is good, the switch is switching. I broke out the manual and it say to try to reset the auto breaker on the motor. OK, Where is the motor? Do I have to drop the cryoplast?

Thanks

Which slide is the problem?
On older fifth wheels, two of the thru-the-frame slide outs have 30A auto resetting circuit breakers for their motors in the 1st 2 positions of the AC/DC Fuse Panel.

[rdnkjeeper]

Sorry, it's a 2019 and the slide with the table and theater seating isn't working. The breakers are good. Like I said I checked everything but the "reset" on the motor. The owners manual says look in the supplied manufacturers manual, but there isn't one that I can find.

[gbkims]

Sorry, it's a 2019 and the slide with the table and theater seating isn't working. The breakers are good. Like I said I checked everything but the "reset" on the motor. The owners manual says look in the supplied manufacturers manual, but there isn't one that I can find.

I can only say that on my 2015, that slide is an electric thru-the-frame slide out.
On mine, the slide motor does not have a reset on it. It just has the DC wires coming to it, they are wire nut connected to the motor's short leads.
Here's some info on them:
https://support.lci1.com/through-fra...c-slide-system
https://support.lci1.com/documents/s...llation-manual

Couple of posts:
https://www.mygrandrv.com/forum/show...de-out-problem
https://www.mygrandrv.com/forum/show...-Slide-Problem

Here's what I have:
The slide DC circuit breakers are the 2 left tin can ones.


Motor/Gear Assembly and the linear actuator up under the coroplast.

[huntr70]

Being a 150 series, it may be a Schwintek slide.

Does it have the 2 "S" rails on the sides of the slides?

If that is the case, the motors are internal to the walls on each side of the slide.

[gbkims]

Yep could be a schwintek slide, like https://www.mygrandrv.com/forum/show...l=1#post203289

[17george]

I got a 1019 295 rl slides are through the frame system

[MarkRizRV]

Hurtr70 should be correct and they are located on the top rails

Watch this

https://youtu.be/xojUdPDWNS0

Mark

[17george]

Sorry, it's a 2019 and the slide with the table and theater seating isn't working. The breakers are good. Like I said I checked everything but the "reset" on the motor. The owners manual says look in the supplied manufacturers manual, but there isn't one that I can find.

I got the same unit I believe it’s under the cryoplast

[huntr70]

I checked the 295's on our lot and they are a Lippert through the frame slide.

Motor should be under the enclosed underbelly.