Back up camera

[theclarks]

Turned the auto lights off and put marker lights on manual and worked perfect. I love the camera and have no delays or issues now. Learn something new every day!

Another trick is to leave "auto light" on and turn on your fog lamps. . . . . .

[YFBay32]

Another trick is to leave "auto light" on and turn on your fog lamps. . . . . .

Good trick!

[GravesDiesel]

My camera is always on also. Is the camera on its own circuit? If so, surely it is fused separately and maybe a switch could be installed near the breaker/fuse panel?

[Country Campers]

My camera is always on also. Is the camera on its own circuit? If so, surely it is fused separately and maybe a switch could be installed near the breaker/fuse panel?

The camera prep install from the factory could be wired to just about anything, a vent fan or on the positive side of a light circuit somewhere. If you can find it maybe you can switch it on and off. If not you could wire it to a marker light right above the camera , this is what did as well as others. I hear now that they are to be wired to this light but many have said they are wired to a fan or light or in my case I could not find where it was wired to. I just taped up the old wire and ran the new cable to the light.

Brian