User Tag List
Thanks: 0
Likes: 0
Results 1 to 3 of 3
-
01-08-2021, 09:40 AM #1
- Join Date
- Sep 2020
- Location
- Fulltime
- Posts
- 14
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
What type of adhesive is used between rear of coroplast and metal trim?
I’m finishing up a project to install SEE LEVEL tank sensors on a 2021 Solitude GK344. I decided to drop the coroplast from the rear to access the fresh water tank over the axels.
When I took the trim piece off the bottom rear, I removed the screws and pulled it away from the coroplast where it was being held together by a soft adhesive. It was strong enough to hold to the trim fairly tight and seemed watertight, but soft and flexible enough to be pulled apart with a little pressure.
Does anyone know what type of adhesive GD uses for the coroplast to trim seal?
Thanks2021 Solitude 344GK
2020 Ford F450 DRW
B&W Companion 25K
-
01-08-2021, 10:45 AM #2
- Join Date
- Jul 2020
- Location
- Central Florida
- Posts
- 727
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
I don't know for sure but your description makes me think it is butyl tape.
Mike & Lisa
Central Florida
2021 Imagine 2970RL
1996 Chevy K3500 Crew SRW 7.4L Gas
-
01-08-2021, 11:18 AM #3
- Join Date
- Sep 2020
- Location
- Fulltime
- Posts
- 14
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Broken leafspring. Another….
Today, 12:32 AM in Axles, Brakes, and Suspension