Entry door adjustment

[trailrydr]

I had to adjust our door also, it was dragging on the drip cap. A small block of wood, a 2# hammer and a few whacks on the cap solved the problem..

This method also works great if some would be thief tries to pry your door open.... block of wood and heavy hammer seems to do the trick when straightening out the edge of the door.

Anything to keep from going to a stealership is always the way to go IMO.

[dryfly]

After you autolevel, drop the nose to neg 1. Simplest fix.

I just gotta ask...........what are you talking about?

[BHutch]

My post above is from 4-1/2 years ago and pertains to the 2017 Reflection 337 we owned at the time. I used a wood block and a ball peen hammer to slightly bend the hinges. I'm not sure this approach would work on our 2020 Solitude.

BTW - you can create a signature block with your RV and tow vehicle information (see mine below). That way you won't have to repeat that information whenever you post or ask a question - and others won't have to ask. You can create a signature by going to:

Forum Actions (on menu bar) -> Edit Profile -> Edit Signature (under My Settings on the left)

Rob

I have created my signature, not sure why it isn't showing up. It shows as active.

[Second Chance]

I have created my signature, not sure why it isn't showing up. It shows as active.

Showing up now...

Rob

[SmallBoxMaker]

Showing up now...

Rob

From what I've observed, the signature block only appears on posts created after the signature block was added.

If you edit your signature, the new one will show up on old posts as long as they were created after the original signature block was added.