User Tag List
Thanks: 0
Likes: 0
Results 1 to 3 of 3
-
05-11-2022, 10:31 AM #1
Simple to separate top cap lights from underbelly rope---
Some people complain in the campgrounds that the cap lights kill the ambiance of the camp ground and make things too bright. I do, however, want my underbelly rope light on so I can not stumble at 3am when i give the dog the same break that I just took )))))
so what I did was to buy a "auto zone" (2 local camping placed were out of stock) a toggle switch that has a pilot light and is water resistant.
1. remove the "BLUE -WHITE" wire to the existing switch (this is Battery plus power wire -{B+} and connect to any assembly you make consisting of 2 blade fuse holders --see photos
2. connect to remaining fuse wires one to each switch
3. remove the red-white wire (cap -hitch lights ) from the junction and connect to the new switch
4. if you switch has a pilot light connect the wire terminal to the white wires junction -- {B-} DISREGARD IF NO PILOT LIGHT ON SWITCH
5. connect the empty terminal on the existing switch (where you removed the blue-white ) to the junction block where the red was removed
see before and after photo also actual wiring phot may help to explainLast edited by ForBruce; 05-11-2022 at 10:35 AM. Reason: add photos
2022 Solitude 378mbs-r with 3rd air and solar package, Flux Capacitor pending, Removed Nautilus and replaced with the Bruce Select-A-Matic
-
05-11-2022, 11:13 AM #2
- Join Date
- Jun 2020
- Location
- Palmetto, Ga.
- Posts
- 431
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I would like to do the same on my 351MR but I have no switch. Mine are controlled by the one control only. If I new which wires feed the cap lights and where to find them I could and a switch.
2021 351MR
2017 Jayco 377rlbh (sold)
-
05-11-2022, 01:21 PM #3
- Join Date
- Aug 2017
- Location
- Florida Space Coast
- Posts
- 3,853
- Blog Entries
- 1
- Mentioned
- 94 Post(s)
- Tagged
- 0 Thread(s)
@ForBruce
Nice job. I did the same but separated the cap lights, underbelly lights, and the front compartment bay light. Then I installed a separate light with a switch just above the front compartment door.
And then I put my rig on jack stands to so some work and messed up the underbelly lights which I had changed over to blue lights! argh!!
Thanks for sharing.Larry KE4DMG
2022 F-350 KRU SRW LB - Airlift 5000+, ForScan, 37 RDS Aux Tank,
2019 310GK-R - Sailuns; MorRyde IS; Disc Brakes; 20K Reese Goosebox
Search kalakamods for my mods
Morryde Safe-T-rail install issues
Today, 12:55 AM in Mods and DIY