User Tag List
Thanks: 0
Results 1 to 5 of 5
-
07-07-2022, 05:10 PM #1
Wiring schematic for my 2022 303rls
Any way that an owner can get a wiring schematic of my camper?
I want to add some lights and switches but need some wiring info.
Thanks allMsgt Ray (Ret) and Margie Parker
2022 GD 303RLS w/Gen-Y gooseneck
2020 Ram 2500 HD Cummins 6.7/3.73 gears
-
07-07-2022, 05:12 PM #2
- Join Date
- May 2020
- Location
- All over - Full-timing
- Posts
- 2,557
- Mentioned
- 46 Post(s)
- Tagged
- 0 Thread(s)
Mark & Mary. Full-timing across the USA (and Canada)!
Current Coach: 2021 Grand Design Reflection 320MKS
Current Rig: 2019 Ford F350 SD Crew Cab, w/8' box, Lariat, SRW, 6.7l Diesel
-
07-07-2022, 05:38 PM #3
Wow....that sucks.
Thanks
QUOTE=MoonShadow_1911;435904]No such animal exists. For any RV manufacturer, except possibly Class A, B, or C.
You'll have to trace the wires yourself.[/QUOTE]
-
07-07-2022, 05:47 PM #4
- Join Date
- May 2020
- Location
- All over - Full-timing
- Posts
- 2,557
- Mentioned
- 46 Post(s)
- Tagged
- 0 Thread(s)
[/QUOTE]It's an "industry standard". Or shall I say substandard. Most of the wiring is done without the luan wall board in place, or even the coroplast. The usually just lay out the length of wires and start hooking things up. One of the things I was hoping to do, before we went full time, was to trace each wire and make my own wiring diagram. That didn't happen as I ran out of time.
Mark & Mary. Full-timing across the USA (and Canada)!
Current Coach: 2021 Grand Design Reflection 320MKS
Current Rig: 2019 Ford F350 SD Crew Cab, w/8' box, Lariat, SRW, 6.7l Diesel
-
07-07-2022, 06:48 PM #5
I am wanting to put another on/off switch in my control panel box to add a small amount of "indirect blue lighting" under my camper, but I like things tidy and looking like it "belongs", not arbitrarily installed.
Thanks....I'll figure it out.
Ray
It's an "industry standard". Or shall I say substandard. Most of the wiring is done without the luan wall board in place, or even the coroplast. The usually just lay out the length of wires and start hooking things up. One of the things I was hoping to do, before we went full time, was to trace each wire and make my own wiring diagram. That didn't happen as I ran out of time.[/QUOTE]
Channging Battery Type?
Today, 01:22 AM in Electrical System and Wiring