sewer hose storage

[Ellen and Jerry]

Looks great smallbox, can you show how it is attached?

[Buckskin]

I added storage tube underneath my Imagine 2250RK, used self tapping screws to connect to frame. But use tube for spare camper water lines and fishing rods but you could also put sewer hoses in it.
Found if you spray sewer hose with WD40 it is easier to slide in rear bumper.

https://www.amazon.com/Valterra-A04-...s%2C182&sr=8-5

[lorend]

Just p/u a 2020 29RS yesterday and only could get two sewer hose in the tube. They were compact down as short as they could be. Is that the way it is?
My sprinter campfire 26RB could hold three in the rear bumper.

Richard

WE have the 2019 29rs and also found the sewer hose tube too short. I installed another tube, from Valterra, next to the factory one. It will hold a Rhinoflex 20' hose with fittings. No need to take anything apart. Works great.

[Cahriad]

I had some space on my tongue between the cylinders and batteries so I made the attached from fence post. The top is my 30' air compressor hose, then my 5' slinky and bottom is a 10' slinky. Works well as most of the time I can get by with the 5' or 10'. Cannot remember the last time I used my 20'.

[SmallBoxMaker]

Looks great smallbox, can you show how it is attached?

Please search for fence post in this forum - there are several threads on it. The photo in reply 2 in this thread: https://www.mygrandrv.com/forum/show...e+post+storage
is pretty close to the way i did it.

The trick is mounting the assembly to the frame with beam clamps.

[Blazerjohn]

1” aluminum square tubing and stainless bolts, nuts and washers hold this to I beam frame.Use fence post end caps.