Hoopy Frood

My guess is that the outer covering, a pox on the engineer behind those things, has shifted and no longer is on size. Personally I would...

I agree with Scott'n'Wendy: check out the brakes and wheel bearings on a new, or new-to-you, trailer. I've seen bearings with minimal...

I have heard of people sprinkling a little flour around the suspect area. Easy to spot a leak very quickly.

I've read that the Goodyear Endurance is made in the US.

Personally I think the best hurricane preparation with a trailer is to use the wheels and roll somewhere else.

Dexter EZ-Flex.

This the forum of Grand Design RV owners. You'll likely have more, and better, responses on a car camping forum. But the price doesn't...

We put ours in when in storage. I don't see any sense in leaving the slides open, and exposed to the weather, including the slide seals.

Burp? :)

And ungodly expensive!!

I'm not Steve, but you need to look at the credentials of the service manager. And ask how, exactly, are the levelers drawing a load...

They don't unless they're being used. But there are likely to be several small draws that add up over a period of time.

Just a FWIW: check the female plug contacts on occasion. Ours developed a loose connection over time, and melted the plug.

Dicor will not set "hard as a rock", it remains soft and can be removed if necessary. But the surface of the sealant will still be above...

The problem with LT, okay one of the problems, is they are rated for a little over 3,000 lbs. So unless you are perfectly balanced you...