2021 22 MLE rv tv signal amplifiers

[zygmunt]

Hello,

The last time I went camping, I tried using the rv tv signal amplifiers. I might had mess it up, because on my previous trip, I tried to connect the Park Cable network to my 22 MLE, which I could not get working either. I wind using the data on my cell phone, which worked for a few days, until I downgrade from 5G to 4G. I read the manual, and I tried using the satellite and cable coax connection. What am I doing wrong?

Thanks!

 

[Capt Bob]

Well, we have only used the cable once. Ran the coax from the ped to the connection in the front storage.
Pulled out the TV and stood on the dinette seat to reach the antenna switch and turned it off (on for OTA signals).
Turned on the tube and went to settings and set the input to cable.

Watch something but can't recall the show. Was a cable network though.

Good luck.

 

[Second Chance]

Thread moved to Electronics.

You would hook park cable up to the "Cable" input in your utility bay and make sure the signal amplifier is off. Some parks don't require a "set-top" box for cable and some do.

You also need to make sure that the TV is set for the right input and then scan for channels.

Rob

 

[zygmunt]

Thread moved to Electronics.

You would hook park cable up to the "Cable" input in your utility bay and make sure the signal amplifier is off. Some parks don't require a "set-top" box for cable and some do.

You also need to make sure that the TV is set for the right input and then scan for channels.

Rob

Rob,

How can you tell if the signal amplifier is off, when the red light is turned off?

Zig

 

[zygmunt]

Rob,

how can you tell if the signal amplifier is off? When the red light is off?

Zig

 

[Second Chance]

Rob,

How can you tell if the signal amplifier is off, when the red light is turned off?

Zig

Yes - push the little pushbutton and the light will go out when the amplifier is off.

Rob