2025 Closet Rod Failures

NormRidg2

New Member
RV LIFE Pro
Joined
Aug 10, 2025
Posts
4
We had our unit for a year now and have had issues with closet rod bending, or failing. Rod bent because the mid support was made of light metal and bent open. I ended up making a replacement out of heavy stock (no need for same under preforming replacement). Then the whole front of the top shelf started coming off. Pulled it out and and found the support that fastens to outside wall was missing screws compare to the other side, which started the failure. I add more and then an addition block of wood under it to beef this up. Has anyone else had issues with their closets?
 
Our 2023 Reflection 337RLS closet rod bent into a pretzel shape and fell down on day 2 of it's very first trip. The toy-like rod was a piece of thin-wall 5/8” steel pipe painted black. The black paint could have been the only reason it lasted that 2 days.

After it fell down, we visited the closest hardware store to our campground and bought two 1 1/4" x 4' dowel rods (longest available at that store), a cheap hand saw, a couple of U-bolts, a pair of closet rod end supports, and a steel 1/8” thick 1” x 6’ flat bar to reinforce the shelf.

I mounted the closet rod end supports, cut the dowel rods to meet in the middle and fit between the walls, drilled new holes in the shelf for the u-bolts and bolted it all together. We have been 30K + miles with various levels of overloading so far and the replacement dowel rods are still there with no sign of trouble.

Our rod is the inside width of the trailer (92 ½”) while the 2025 and later rod is shorter (59 ¾”). Though the newer rod shorter, it is built just like ours and I would not be surprised when it bends into a pretzel too. Best thing you can do is replace that imitation toy closet rod before it folds up while you are travelling.

This is the crappiest piece of poor design we have found so far in our trailer in our 4 years of ownership.
 
I replaced the plastic rod end holders with metal ones. I also inserted a steel pipe through the middle of the thin metal rod.
Then I added a T support in the middle.
 

Attachments

  • Closet rod 1.jpg
    Closet rod 1.jpg
    65.8 KB · Views: 17
  • Closet rod center support.jpg
    Closet rod center support.jpg
    40.4 KB · Views: 12

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom