337 rear stabilizers

[HDSmurph]

My rear stabliers on my 337 are all the way up. When trying to run them down they move a little the a clutching sound happens like on the slides. Anyone know how to fix this? I thought I might try and manual try to move them down, but the manual says you have to unplug one of the motor leads? is this true? thanks!

 

[Dave and Monica]

It sounds like you have a stripped gear or broken teeth on the rack. You should be able to use the manual crank without removing a motor lead as you're driving the gearbox. If it's a stripped gear or broken teeth you won't be able to deploy them manually either. Looks like a trip to the dealer...

Dave

 

[GDRV Service]

My rear stabliers on my 337 are all the way up. When trying to run them down they move a little the a clutching sound happens like on the slides. Anyone know how to fix this? I thought I might try and manual try to move them down, but the manual says you have to unplug one of the motor leads? is this true? thanks!

Hi @HDSmurph,

Please add your 17-digit RV VIN to the "About Me" section of your forum profile as it helps us research your concern. Thanks in advance...

Best regards,
~ Janice

 

[HDSmurph]

Could I have sheered a pin? Dealer thinks that what it could be. of course it isn't covered under warranty. First time out, lifted jacks and now they won't go down, a little frustrated.

 

[Dave and Monica]

Call GD Customer Service at 574.825.9679...have your 17 digit VIN available.

Janice...I don't think that the 'about me' works for a 'Registered Guest'.

Dave

 

[GDRV Service]

Could I have sheered a pin? Dealer thinks that what it could be. of course it isn't covered under warranty. First time out, lifted jacks and now they won't go down, a little frustrated.

Hi @HDSmurph,

Please send me a private message (PM) with your 17-digit RV VIN, name and contact information. Or, please feel free to contact our Customer Support directly at (574) 825-9679 for assistance.

Edit: Or, if available to "Registered Guests," please add the last 8-digits of your 17-digit RV VIN to your forum profile "signature."

Thanks in advance...

Best regards,
~ Janice

 

[HDSmurph]

Taking to dealer tonight, Thanks every one just thought I could fix this my self.

 

[james quinn]

My rear stabliers on my 337 are all the way up. When trying to run them down they move a little the a clutching sound happens like on the slides. Anyone know how to fix this? I thought I might try and manual try to move them down, but the manual says you have to unplug one of the motor leads? is this true? thanks!

try using your foot to press down on one of the feet. I have also had occasion where I raise / lower /raise / lower in quick sequence and it'll shake loose.

 

[chilly-in-vermont]

Sometimes mine won't go down on the first try, they just click. Raise them just a little and then, if like mine, they will go down normally. Doesn't make sence but it works for me.

 

[HDSmurph]

Dealer called broken gear waiting on parts from GD. I don't understand how it happened, they went down side to side they were off by 1/2" put a board under them to make more level. Went to go down went about 1/4" stopped, clicking noise. Would go up 1/4" clicking noise. Hope this will be our only issue. Love the camper otherwise.

 

[GDRV Service]

Dealer called broken gear waiting on parts from GD. I don't understand how it happened, they went down side to side they were off by 1/2" put a board under them to make more level. Went to go down went about 1/4" stopped, clicking noise. Would go up 1/4" clicking noise. Hope this will be our only issue. Love the camper otherwise.

Hi @HDSmurph,

PLEASE send me your contact information and 17-digit RV VIN. Otherwise, I don't know who you are and am unable to help you. Thanks in advance...

Best regards,
~ Janice