Backup Camera on 2024 320G

[MarkDL]

I recently installed a Furrion Backup System on our GB 320G. That backup camera is not receiving power. The camera fit nicely into the plug and factory installed mount. I have verified the cameara does work with the monitor.

I haven't found where the power source connection is located for the camera. General search for a wiring diagram has thus far been unsuccessful. Any help much appreciated.

MarkL

 

[Second Chance]

Most of the rigs are wired for the camera power to come from the tow vehicle running lights. Have you connected the truck to the trailer, turned on its running lights, and checked the camera?

Rob

PS: wiring diagrams/schematics for these RVs don't really exist.

 

[huntr70]

What Rob said....hook up the truck and turn the lights on.

 

[Mechanic Bob]

I made this jumper so I did not have to hook up truck to the trailer.
Jumps between the 12V pin and the running light pin. Fuse protected.

 

[MarkDL]

Thank you for your replies. Changing the truck lights from Auto to On activated the camera.