Hey All,
Make Sure those Drawers are Closed and Double Check Prior to Opening Slides!
Went and picked up our new to us Solitude 344GK a few weeks back. Installed the license plate and placed the registration in the rear facing desk drawer since a friend was pulling it a couple hours to our house.
Arrived at home without any issues until we opened the slides. Passenger side didn’t open correctly and next thing you know the front was 2’ out and the rear was only 1’ out. Crawled under table and drawer opened during transport and was wedge between interior slide fascia/trim and exterior wall.
After getting the drawer out of the way the slide was no longer working correctly. Removed under belly and found that some teeth on the slide gear pack were sheared off when slide ended up crooked.
$100 part and a few hours to fix. Re-install of the under belly and insulation was the hardest part.
Friendly reminder to take a look at all slides prior to opening and if anyone needs any knowledge on how Lippert Hydraulic Slides function, adjusted, or repaired along with tips for underbelly remove/replace fell free to reach out.
Thanks,
Matt
Make Sure those Drawers are Closed and Double Check Prior to Opening Slides!
Went and picked up our new to us Solitude 344GK a few weeks back. Installed the license plate and placed the registration in the rear facing desk drawer since a friend was pulling it a couple hours to our house.
Arrived at home without any issues until we opened the slides. Passenger side didn’t open correctly and next thing you know the front was 2’ out and the rear was only 1’ out. Crawled under table and drawer opened during transport and was wedge between interior slide fascia/trim and exterior wall.
After getting the drawer out of the way the slide was no longer working correctly. Removed under belly and found that some teeth on the slide gear pack were sheared off when slide ended up crooked.
$100 part and a few hours to fix. Re-install of the under belly and insulation was the hardest part.
Friendly reminder to take a look at all slides prior to opening and if anyone needs any knowledge on how Lippert Hydraulic Slides function, adjusted, or repaired along with tips for underbelly remove/replace fell free to reach out.
Thanks,
Matt