Cable Hookup

BE

beatcop49

Guest
I'm about to take delivery on a new Reflection TT. I have never had a TT with more than one TV...this one will have 3. In my docking station, there are 4 connections....one marked cable, one marked living room, one marked bunkhouse, amd one marked master bedroom. Will I need a splitter?
 
If you are just using a cable from the campground, hook to cable input.

If you are hooking up a satellite dish, the others are direct feeds to each location.
 
If you are just running one Sat receiver, you will need to split the out signal to all the tvs. Ive got a Solitude, and I guess they are probably wired the same. I ran the Sat in on the living room, and ran the sat out split to the LR and the cable. This made the cable line an out, and I split it behind the docking station to the other 2 locations.
 
We have a dish 322 dual room receiver. You can watch 2 TV's in 2 separate channels at the same time. The living room has an IR remote and the bedroom has a UHF remote. The both work on a single cable in from the dish to the living room, and the signal is split and sends it back through the cable on a different channel to the utility center where you can split it to the bedroom and pass through. It works great! IMG_20141030_150753069.jpg
 

New posts

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom