Compass Connect Lighting Control possible dimmer?

[Sparky12]

What I used-

Thanks for this!

I'm definitely looking at dimmer options as our 17MKE has all lights on or off and can't selectively turn any lights off outside of the entry and 1 under cabinet light that aren't controlled by CC.

I'll have to look because we do have a hard switch, that's 3-way by the door. Assuming this switch just feeds to the Unity and not directly to the lights. Because of that I'm looking at this option: Rotary PWM High Side Dimmer instead of going with another switch. and picking up the output from the Unity then spicing in to the light feed.

Again, I appreciate your leg work on this!

Wired into feed wires at Unity panel. Multiple wireless remotes can be added and mounted anywhere.
Available on Amazon or at https://www.redwagondist.com/product-page/eco-led-wireless-wall-switch-dc-kit-value-pack

 

[Blam0381]

Hi Sparky. Any chance you can tell me how you wired this? I bought the same dimmer but cannot make it work. Could be defective but not certain. I I have the input + connected to where the lighting positive wire was on the unity controller, output + connected to the lighting positive wire and both input and output grounds to the main ground (I have tried only grounding the input side of the dimmer too but no go)

Any advice is appreciated.

Thanks
Bryan

 

[Sparky12]

Hi Sparky. Any chance you can tell me how you wired this? I bought the same dimmer but cannot make it work. Could be defective but not certain. I I have the input + connected to where the lighting positive wire was on the unity controller, output + connected to the lighting positive wire and both input and output grounds to the main ground (I have tried only grounding the input side of the dimmer too but no go)

Any advice is appreciated.

Thanks
Bryan

You have to separate the (-) output and input as well. You cannot just connect them both to (-).