RustyNCA
Member
Purchased the trailer with the area complete removed, as you see in the one photo. He did give me pieces of what he removed. But I decided to go a different direction.
So, I made the stainless pullout shelf with a built in drawer. Used some locking drawer slides rated at 150lb, or might have been even more than that. Had to make all new interior walls, side wall etc.
Added some LED lights with a switch on a panel with USB charging port and lighter port. Still need to finish the outside walls and the storage side. I added some support for a TV Mount on the wall to the right (in case the wife makes me put one in). Also have a cabinet door made to fit that side and will have an option to access the storage from under the bunks when I am done.
Also put the bunks back in that the prior owner removed, but kept.
I don't know how to rotate the two photos so I apologize.
Cheers
Bryan





So, I made the stainless pullout shelf with a built in drawer. Used some locking drawer slides rated at 150lb, or might have been even more than that. Had to make all new interior walls, side wall etc.
Added some LED lights with a switch on a panel with USB charging port and lighter port. Still need to finish the outside walls and the storage side. I added some support for a TV Mount on the wall to the right (in case the wife makes me put one in). Also have a cabinet door made to fit that side and will have an option to access the storage from under the bunks when I am done.
Also put the bunks back in that the prior owner removed, but kept.
I don't know how to rotate the two photos so I apologize.
Cheers
Bryan




