Dinette cushions too big

[UPCamper]

On our 15BH AIM, when we make the dinette into a bed the cushions are too long and overlap about three inches not making a flat surface to sleep on. Anyone else have this issue?

 

[Soundsailor]

On our 15BH AIM, when we make the dinette into a bed the cushions are too long and overlap about three inches not making a flat surface to sleep on. Anyone else have this issue?

First off, welcome to the forum, it looks like this is your first post. Have you checked your owner's manual to see if you're laying out the cushions as expected?

 

[UPCamper]

On our 15BH AIM, when we make the dinette into a bed the cushions are too long and overlap about three inches not making a flat surface to sleep on. Anyone else have this issue?

There are no directions in the manual. I tried different directions.

 

[Soundsailor]

There are no directions in the manual. I tried different directions.

On this video (https://www.youtube.com/watch?v=gHC7YoDFvP0 at about 3:05) it shows your dinette. Just looking at it from here (I've never seen your coach), it appears that the two seat backs would occupy the center, and the two seat cushions would slide all the way to where the backs had been. Have you tried that configuration?

 

[Soundsailor]

[MENTION=331]huntr70[/MENTION] might be able to help you, the video I posted was from his shop.

 

[huntr70]

On our 15BH AIM, when we make the dinette into a bed the cushions are too long and overlap about three inches not making a flat surface to sleep on. Anyone else have this issue?

They fit, you just have to push the cushions together. They appear wider than the hole, but you just push them together.