driver side led running light on 2014 grand design reflection 303rls does not work. all other lights work. what can be the cause and how do you get the light assembly off?
driver side led running light on 2014 grand design reflection 303rls does not work. all other lights work. what can be the cause and how do you get the light assembly off?
Should be able to get the lens off by twisting up, sometimes a small flathead screwdriver can help. I’ve even used a plastic trim tool. A couple of screws hold the marker light base assembly in place. Remove those and pry entire assembly away from sidewall. You can use a volt meter to check if there is 12V current to the light. Don’t know if you will need to disassemble further to access the wire connection points. Best case scenario - loose wire. Better case scenario, need to replace light assembly (use the GD parts locator to get correct p/n). Worst case scenario, no power at the assembly and need to start tracing wires. Good luck!
